ROBOTIQ PALLETIZING SOLUTION Original Notice page 93

1 1 . Harmonized Standards
1 1 .1 . Applied standards
This section describes all applied harmonized standards for the design and production of the AirPick Vacuum Gripper. Conformity of
the product is only met if all instructions of the current user manual are followed. Among others; proper installation, safety measures and
normal usage must be respected. A risk assessment specific to the user's final application must also be carried out.
Caution
Conformity of the product is only met if all instructions of the following manual are followed. Among others; installation,
safety measure and normal usage must be respected.
The following standards have been applied:
ISO 12100 2010
ISO 9409-1 2004
ISO 4414 2010
IEC 61000-6-2 2016
IEC 61000-6-4 2018
EN 50581 2012
Safety of machinery — General principles for design — Risk assessment and risk reduction
Manipulating industrial robots – Mechanical interfaces – Part 1: Plates
Pneumatic fluid power – General rules and safety requirements for systems and their components
Generic standards – Immunity standard for industrial environments
Generic standards – Emission standard for industrial environments
Technical documentation for the assessment of electrical and electronic products with respect to
the restriction of hazardous substances
Palletizing Solution - Instruction Manual
93