Maintenance - ROBOTIQ PALLETIZING SOLUTION Original Notice

7. Maintenance

Following the maintenance interval will ensure:
Correct functioning of the equipment;
l
Validity of the warranty;
l
Proper lifetime of the equipment.
l
Caution
Maintenance operations are for the average normal usage of the Robotiq Palletizing Solution, the maintenance intervals must
be adjusted according to the environmental conditions such as:
Operating temperature
l
Humidity
l
Presence of chemical(s)
l
Presence of physical objects (debris, scraps, dust, grease, etc.)
l
Interaction with operated parts (sharp or rough)
l
Dynamics of the operation (accelerations)
l
Caution
Always turn off the Palletizing Solution and depressurize the air supply tube before performing any maintenance operation on
it. For more details about the depressurization, please refer to Depressurizing the Supply Line section.
Caution
The Palletizing Solution is not waterproof or water resistant without additional protection. Only clean the equipment with a dry
towel.
Caution
Maintenance operator must be grounded to prevent electrostatic discharge that could damage electronic equipments.
Palletizing Solution - Instruction Manual
82