DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
CHAPTER 4.
INTERFACE
Initial Configuration Wizard
To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened
page, click the OK button and wait until the factory default settings are restored.
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you
are connected to the wireless network of DVG-5402G (see the WLAN name (SSID) on the barcode
label on the back panel of the device) and click the NEXT button.
Click the START button.
CONFIGURING
Figure 19. Restoring the default settings in the Wizard.
Figure 20. Checking connection to the wireless network.
Figure 21. Starting the Wizard.
Page 39 of 244
Configuring via Web-based Interface
VIA
WEB-BASED