Table of Contents
Advertisement
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
Parameter
Support PRACK
Replace # with %23
Locale selection
Before the first call
Detection mode
Codec
Payload type
Registration expire
timeout
Registration retry
interval
Move the switch to the right to enable the PRACK method
(Provisional Response ACKnowledgement). The PRACK method
provides reliable transmission of packets with provisional responses
to an initiating request upon setting a session in accordance with
RFC3262.
RFC3261 doesn't support # (pound) for a phone number. If a phone
number has the character, move the switch to the right to replace the
character # with the special sequence %23.
Select your country from the drop-down list. By default, the value
RU (Russia) is specified. This setting defines the parameters of the
phone signals traditional for the specific country.
CallerID
Move the switch to the right to deliver a phone number to the phones
connected to the FXS ports of the router before the first phone ring
when receiving an incoming call.
From the drop-down list, select an operation mode of the automatic
caller identification function for the phones connected to the FXS
ports of the router.
To disable the automatic caller identification function for the phones
connected to the FXS ports of the router, select the Do not use
value from the drop-down list.
RTP Redundancy
The RTP Redundancy function allows restoring a part of lost RTP
packets while transmitting audio data.
From the drop-down list, select a codec to which the function should
be applied.
To disable the function, select the None value from the drop-down
list.
Payload data type.
Registration
A time period (in seconds) after which the router changes the
registration status in case of no response from the SIP proxy server.
A time period (in seconds) after which the registration will be
repeated.
Page 191 of 244
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
