Table of Contents
Advertisement
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
URL Filter
On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites.
To enable the URL filter, in the General Settings section, move the Enable switch to the right,
then select the needed mode from the Type drop-down list:
•
Block listed URLs: when this value is selected, the router blocks access to all addresses
specified in the Filters section;
•
Block all URLs except listed: when this value is selected, the router allows access to
addresses specified in the Filters section and blocks access to all other web sites.
Click the APPLY button.
To specify URL addresses to which the selected filtering mode will be applied, in the Filters
section, click the ADD button and enter a relevant address in the displayed line. Then click the
APPLY button.
To remove an address from the list of URL addresses, click the Delete icon ( ) in the line of the
relevant URL address. Then click the APPLY button.
Figure 172. The Firewall / URL Filter page.
Page 219 of 244
Configuring via Web-based Interface
Advertisement
Table of Contents
