Table of Contents
Advertisement
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
Figure 65. The page for creating a new PPPoE connection. The VLAN section.
Parameter
Use VLAN
VLAN ID
VLAN priority
When all needed settings are configured, click the APPLY button.
After clicking the button, the window for creating an additional connection opens.
If your ISP offers access to local services (e.g. audio and video resources), select the existing
connection or select the create a new connection choice of the radio button. Then click the OK
button. On the page displayed, specify the parameters for the connection of the Dynamic IPv4 or
Static IPv4 type and click the APPLY button. Click the BACK button to specify other settings for
the connection of the PPPoE type.
If you do not need to create an additional connection, click the SKIP button. In this case, the
Connections Setup / WAN page opens.
VLAN
Move the switch to the right to allow the router to use tagged VLAN
connections.
An identifier for the VLAN. The field is displayed when the Use
VLAN switch is moved to the right.
A priority tag for the type of traffic transmitted. The field is
displayed when the Use VLAN switch is moved to the right.
Page 82 of 244
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
