Table of Contents
Advertisement
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
Parameter
RTP DSCP / SIP DSCP
Dial delay time
Waiting for first digit
Support rport
NAT keep alive
NAT support interval
Send RTCP
Send RTCP XR
Sending interval
When all needed settings are configured, click the APPLY button (
Network Settings
Differentiated Services Codepoint.
From the relevant drop-down list, select tags for voice and signaling
traffic.
Timeout settings
The delay time before the next digit is dialed (from 3 to 9 seconds).
When this time expires, the router regards that the dialing is
completed and sends the request to the server. Select a needed value
from the drop-down list.
The delay time before the first digit is dialed (in seconds). Specify a
needed value.
NAT
Move the switch to the right to enable the Symmetric Response
Routing function in accordance with RFC3581. This function allows
sending responses to a request to the port and IP address from which
the request was received via the NAT-enabled router. The SIP proxy
server must support the function.
Move the switch to the right to allow the router to support the state
of automatically forwarded ports by periodic exchange of service
messages. If the switch is moved to the right, the NAT support
interval field is available for editing.
The time interval between service messages. Specify a needed value.
RTCP
Real-Time Transport Control Protocol.
Move the switch to the right to allow sending RTCP packets. RTCP
packets exchange allows receiving statistics on RTP packets
delivery.
Move the switch to the right to allow sending RTCP packets of the
XR (Extended Report) type. Packets of this type allows more service
information to be sent.
Specify the time period (in seconds) between sending packets.
Page 194 of 244
Configuring via Web-based Interface
Description
).
Advertisement
Table of Contents
