Table of Contents
Advertisement
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
9. In the opened Wireless Network Connection window, select the wireless network DVG-
5402G (for operating in the 2.4GHz band) or DVG-5402G-5G (for operating in the 5GHz
band) and click the Connect button.
10. In the opened window, enter the network key (see WPS PIN on the barcode label on the
back panel of the device) in the Security key field and click the OK button.
11. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
If you perform initial configuration of the router via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the router you will need to
reconfigure the wireless connection using the newly specified settings.
Figure 12. The list of available networks.
Page 31 of 244
Installation and Connection
Advertisement
Table of Contents
