Table of Contents
Advertisement
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
To activate the WPS function via the web-based interface, on the tab of the relevant band, click the
ENABLE WPS button.
When the WPS function is enabled, the Information section is available on the page.
Parameter
WPS state
Default PIN code
Network name (SSID)
Network authentication The network authentication type specified for the wireless network.
Encryption
Password PSK
UPDATE
RESET TO
UNCONFIGURED
The state of the WPS function:
•
Configured (all needed settings are specified; these settings
will be used upon establishing the wireless connection)
•
Unconfigured (after activating the WPS function, the SSID
and the encryption key will be configured automatically, the
network authentication type will be changed to WPA2-PSK).
The PIN code of the router. This parameter is used when connecting
the router to a registrar to set the parameters of the WPS function.
The name of the router's wireless network.
The encryption type specified for the wireless network.
The encryption password specified for the wireless network.
Click the button to update the data on the page.
Click the button to reset the parameters of the WPS function.
Page 124 of 244
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
