Hardware Overview Front Panel Power LED Indicates the unit is powered on. The Status LED will flash when performing a self-test/booting up or Status/Alarm is registering with the service provider. The Status LED will flash green slowly when the system is connected with the service. The Alarm LED will light solid red if the self-test or bootup fails.
Hardware Overview (continued) Rear Panel Phone Ports Connect to your phones using standard phone cabling. Connect to your Ethernet enabled computers using Ethernet LAN Port cabling. WAN Port Connects to your broadband modem using an Ethernet cable. Reset This is used to reset the unit to the factory default settings. Power The power adapter attaches here.
If your computer connects directly to a DSL or Cable modem and does not connect to a router, follow the steps below to install your DVG-1402S. For any other configuration, please refer to the user manual located on the CD-ROM. After the steps are completed, your setup should look similar to the diagram below.
Attach one end of the provided phone cable (black) to a standard analog telephone. h. Attach the other end of the phone cable to the phone port labeled 1 on the rear panel of the DVG-1402S. i. Reconnect the power to the Cable/DSL Modem (Plug in or turn on the power switch).
PPPoE Configuration Some Internet Service providers use PPPoE as their method of connecting clients. If you have a PPPoE connection, you must follow the steps below to complete the configuration of your hardware. If you are unsure of your connection type or do not know your username and password, please check with your Internet Service Provider.
Check to see if the status LED light goes from blinking green to solid green on the front panel of the DVG-1402S. The information found on the Device Information page is necessary for VoIP service...
D-Link Technical Support. You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.