Page 1 User Manual DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN (lifeline) Port, and USB Port April 2017...
Page 2: Table Of Contents
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN (lifeline) Port, and USB Port User Manual Contents Chapter 1. Introduction..........5 Contents and Audience............5 Conventions..............5 Document Structure............5 Chapter 2. Overview..........6 General Information............6 Specifications*.............7...
Page 3 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN (lifeline) Port, and USB Port User Manual Status..............86 Network Statistics............86 DHCP..............87 Routing Table............88 Clients..............89 Active Sessions............90 Multicast groups............91 Net................92 WAN..............92 Creating PPPoE WAN Connection..........93 Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection....97...
Page 4 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN (lifeline) Port, and USB Port User Manual 3G/LTE Modem..............202 Settings..............203 Information.............204 PIN..............205 USB Storage...............207 Information.............207 Filebrowser.............208 Print Server............209 Samba..............210 FTP..............211 DLNA..............212 Transmission..............214 Transmission Settings...........214...
Page 5: Chapter 1. Introduction
Chapter 2 gives an overview of the router's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the router DVG-N5402G/ACF and configure a PC in order to access its web-based interface. Chapter 4 describes all pages of the web-based interface in detail.
Page 6: Chapter 2. Overview
You can simply update the firmware: the router itself finds approved firmware on D-Link update server and notifies when ready to install it. 1 Not included in the delivery package. D-Link does not guarantee compatibility with all USB modems. For the list of supported USB modems, see the Specifications* section, page 7.
Page 7: Specifications
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Overview (lifeline) Port, and USB Port User Manual Specifications Hardware · Interfaces 1000BASE-X SFP WAN port · 4 10/100/1000BASE-T LAN ports ·...
Page 8 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Overview (lifeline) Port, and USB Port User Manual Phone Call Features · Direct IP-to-IP сall without SIP proxy · Lifeline (PSTN-backup) ·...
Page 9 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Overview (lifeline) Port, and USB Port User Manual Software Network functions · Support of IEEE 802.1X for Internet connection · DHCP server/relay ·...
Page 10 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Overview (lifeline) Port, and USB Port User Manual Software Management · Local and remote access to settings through TELNET/WEB (HTTP/HTTPS) · Multilingual web-based interface for configuration and management ·...
Page 11 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Overview (lifeline) Port, and USB Port User Manual Wireless Module Parameters Receiver sensitivity · 802.11a (typical at PER < 10% at room temperature 25 °C)
Page 12: Operating Environment
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Overview (lifeline) Port, and USB Port User Manual Wireless Module Parameters · 802.11ac (typical at PER < 10% at room temperature 25 °C)
Page 13: Supported Usb Modems
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Overview (lifeline) Port, and USB Port User Manual Supported USB modems · Alcatel X500 · D-Link DWM-152C1 · D-Link DWM-156A6 · D-Link DWM-156A7 ·...
Page 14: Product Appearance
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Overview (lifeline) Port, and USB Port User Manual Product Appearance Front and Right Side Panels Figure 1. Front panel view. Mode Description The router is powered on.
Page 15 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Overview (lifeline) Port, and USB Port User Manual Mode Description The receiver is on-hook, the phone is registered on the Solid green SIP server.
Page 16: Back Panel
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Overview (lifeline) Port, and USB Port User Manual Back Panel Figure 2. Back panel view. Port Description DC 12V Power connector. ON/OFF A button to turn the router on/off.
Page 17 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Overview (lifeline) Port, and USB Port User Manual Port Description LINE A PSTN port to connect to the telephone network. The device is also equipped with two external non-detachable Wi-Fi antennas.
Page 18: Delivery Package
• “Quick Installation Guide” (brochure). • The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
Page 19: Chapter 3. Installation And Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual CHAPTER 3. INSTALLATION AND CONNECTION Before You Begin Please, read this manual prior to installing the device. Make sure that you have all the necessary information and equipment.
Page 20 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual USB Modem To connect to an LTE, 3G GSM or CDMA network, you should use a USB modem. Connect it to...
Page 21: Connecting To Pc
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual Connecting to PC PC with Ethernet Adapter 1. Make sure that your PC is powered off.
Page 22: Obtaining Ip Address Automatically In Os Windows Xp
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual Obtaining IP Address Automatically in OS Windows XP 1. Click the Start button and proceed to the Control Panel > Network and Internet Connections >...
Page 23 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual 3. In the Local Area Connection Properties window, on the General tab, select the Internet Protocol (TCP/IP) line.
Page 24 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual 4. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons.
Page 25: Obtaining Ip Address Automatically In Os Windows 7
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual Obtaining IP Address Automatically in OS Windows 7 1. Click the Start button and proceed to the Control Panel window.
Page 26 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line.
Page 27 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
Page 28 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line.
Page 29 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual 6. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons.
Page 30: Pc With Wi-Fi Adapter
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual PC with Wi-Fi Adapter 1. To connect via USB modem: connect your USB modem to the USB port located on the back panel of the router.
Page 31: Configuring Wi-Fi Adapter In Os Windows Xp
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual Configuring Wi-Fi Adapter in OS Windows XP 1. Click the Start button and proceed to the Control Panel > Network and Internet Connections >...
Page 32: Configuring Wi-Fi Adapter In Os Windows 7
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual Configuring Wi-Fi Adapter in OS Windows 7 1. Click the Start button and proceed to the Control Panel window.
Page 33 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual 6. In the opened Wireless Network Connection window, select the wireless network DVG- N5402G (for operating in the 2.4GHz band) or DVG-N5402G-5G (for operating in the...
Page 34: Connecting To Web-Based Interface
(create a WAN connection, change the parameters of the wireless network, specify the settings of the firewall, etc.). Router DVG-N5402G/ACF with default settings cannot connect to the Internet. To get started, please set your own password for access to the web-based interface and change the WLAN name (SSID);...
Page 35 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual Remember or write down the new password for the administrator account. In case of losing the new password, you can access the settings of the router only after restoring the factory default settings via the hardware RESET button.
Page 36: Web-Based Interface Structure
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual Web-based Interface Structure General Information Page After successful registration the Home / Information page opens.
Page 37 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual The web-based interface of the router is multilingual. If you need to select another language for the web-based interface, place the mouse pointer over the English caption in the top part of the page and select a language from the menu displayed.
Page 38: Menu Sections
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual Menu Sections To configure the router use the menu in the left part of the page.
Page 39 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual The pages of the Control section are designed for creating restrictions on access to the Internet (for the description of the page, see the Control section, page 217).
Page 40: Notifications And System Drop-Down Menu
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual Notifications and System Drop-down Menu The router's web-based interface displays the notifications in the top right part of the page.
Page 41 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual Control Description Click the icon to save new settings to the non-volatile memory.
Page 42 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Installation and Connection (lifeline) Port, and USB Port User Manual Control Description Click the icon to safely disconnect the USB storage. Also you can safely disconnect the USB storage on the USB storage / Information page.
Page 43: Chapter 4. Configuring Via Web-Based Interface
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual CHAPTER 4. CONFIGURING WEB-BASED INTERFACE Monitoring The page displays an interactive scheme which illustrates the router's settings and the LAN structure.
Page 44 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual The interactive scheme displays the following elements: Control Description The Internet element displays information on the active connection.
Page 45 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Control Description The Virtual Servers element is designed for redirecting incoming traffic to a specific IP address in the LAN.
Page 46 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Control Description The Wireless element displays information on Wi-Fi module operation in the 2.4GHz band. To switch to the editing mode of Fi module settings in the 5GHz band, click the icon (Band).
Page 47: Click'n'connect
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Click'n'Connect To configure connection to the Internet, click the Click'n'Connect link in the Home section.
Page 48 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 24. The page for selecting a 3G network operator. On the opened page, from the Provider drop-down list, select your country and operator if you are...
Page 49 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 25. The page for selecting the connection type. On the opened page, select the needed choice of the radio button and click the Next button.
Page 50: Creating Wan Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Creating WAN Connection PPPoE Connection Figure 26. Configuring PPPoE WAN connection.
Page 51: Ipv6 Pppoe Or Pppoe Dual Stack Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual IPv6 PPPoE or PPPoE Dual Stack Connection Figure 27. Configuring IPv6 PPPoE WAN connection.
Page 52: Static Ip Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Static IP Connection Figure 28. Configuring Static IP WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 53: Dynamic Ip Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Dynamic IP Connection Figure 29. Configuring Dynamic IP WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 54: Static Ipv6 Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Static IPv6 Connection Figure 30. Configuring Static IPv6 WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 55: Dynamic Ipv6 Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Dynamic IPv6 Connection Figure 31. Configuring Dynamic IPv6 WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 56: Pppoe + Static Ip Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual PPPoE + Static IP Connection Figure 32. Configuring PPPoE + Static IP WAN connection.
Page 57 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 33. Configuring PPPoE + Static IP WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 58: Pppoe + Dynamic Ip Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual PPPoE + Dynamic IP Connection Figure 34. Configuring PPPoE + Dynamic IP WAN connection.
Page 59 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 35. Configuring PPPoE + Dynamic IP WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 60: Pptp + Static Ip Or L2Tp + Static Ip Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual PPTP + Static IP or L2TP + Static IP Connection Figure 36. Configuring PPTP + Static IP WAN connection.
Page 61 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 37. Configuring PPTP + Static IP WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 62: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 38. Configuring PPTP + Dynamic IP WAN connection.
Page 63 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 39. Configuring PPTP + Dynamic IP WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 64: 3G Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual 3G Connection Figure 40. Configuring 3G WAN connection. In the Connection name field, specify a name for the connection for easier identification.
Page 65: Lte Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual LTE Connection For the USB modem Megafon M100-1, please reboot the router after finishing the Wizard.
Page 66: Checking Internet Availability
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Checking Internet Availability On the page, you can check the WAN connection you have created.
Page 67: Configuring Wireless Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Configuring Wireless Connection Figure 43. Selecting the operating mode for the wireless network.
Page 68 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On the opened page, in the Network name (SSID) field, specify a new name for the network in the 2.4GHz band (use digits and Latin characters).
Page 69 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On the next page, you can modify security settings of the WLAN in the 2.4GHz band.
Page 70 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On the opened page, you can configure a guest wireless network in the 2.4GHz band.
Page 71 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 47. Configuring a guest network in the 2.4GHz band. On the opened page, in the Network name (SSID) field, specify a new name for the guest network.
Page 72 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On the opened page, modify security settings of the guest network in the 2.4GHz band.
Page 73: Configuring Iptv
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Configuring IPTV On the page, you can configure the router to use an IPTV set-top box.
Page 74: Wireless Network Settings Wizard
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Wireless Network Settings Wizard To specify all needed settings for your wireless network, click the Wireless network settings wizard link in the Home section.
Page 75: Access Point Mode
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Access Point Mode On the opened page, in the Network name (SSID) field specify a new name for the network in the 2.4GHz band (use digits and Latin characters).
Page 76 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On the next page, you can modify security settings of your wireless network in the 2.4GHz...
Page 77 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On the opened page, you can configure a guest wireless network in the 2.4GHz band.
Page 78 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 54. The page for configuring a guest network in the 2.4GHz band.
Page 79 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On the opened page, modify security settings of the guest network in the 2.4GHz band.
Page 80: Client Mode
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Client Mode On the opened page, select the band of the network to which you want to connect from the Wireless network range drop-down list and click the Search button.
Page 81 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 57. The page for entering the password for connection to the wireless network.
Page 82 (SSID) field of the relevant section. Use digits and Latin characters. It is strongly recommended to configure the secure wireless network of DVG-N5402G/ACF. To do this, select the Protected value from the Security mode drop-down list and enter a key (a password that will be used to access your wireless network) in the Network key field.
Page 83: Virtual Server Settings Wizard
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Virtual Server Settings Wizard To create a virtual server for redirecting incoming Internet traffic to a specified IP address in the LAN, click the Virtual server settings wizard link in the Home section.
Page 84 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description A port of the IP address specified in the Private IP field to which traffic is directed from the Public port.
Page 85: Iptv Settings Wizard
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual IPTV Settings Wizard To configure the router to use an IPTV set-top box, click the IPTV settings wizard link in the Home section.
Page 86: Status
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Status The pages of this section display data on the current state of the router: network statistics •...
Page 87: Dhcp
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual DHCP The Status / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as well as the IP address expiration periods (the lease time).
Page 88: Routing Table
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Routing Table The Status / Routing table page displays the information on routes. The table contains destination IP addresses, gateways, subnet masks, and other data.
Page 89: Clients
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Clients On the Status / Clients page, you can view the list of devices connected to the router and devices accessing its web-based interface.
Page 90: Active Sessions
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Active Sessions On the Status / Active sessions page, you can view information on current sessions in the router's network.
Page 91: Multicast Groups
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Multicast groups The Status / Multicast groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.
Page 92: Net
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection).
Page 93: Creating Pppoe Wan Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Creating PPPoE WAN Connection To create a connection of the PPPoE type, click the Add button on the Net / WAN page.
Page 94 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 69. The page for creating a new PPPoE connection. The Ethernet section.
Page 95 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 70. The page for creating a new PPPoE connection. The PPP section.
Page 96 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Select the checkbox if you want the router to establish connection to the Internet on demand.
Page 97: Creating Ipv6 Pppoe Or Pppoe Dual Stack Wan Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection To create a connection of the IPv6 PPPoE or PPPoE Dual Stack type, click the Add button on the Net / WAN page.
Page 98 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 73. The page for creating a new IPv6 PPPoE connection. The Ethernet section.
Page 99 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 74. The page for creating a new IPv6 PPPoE connection. The PPP section.
Page 100 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description For the PPPoE Dual Stack type only. Static IP Address Fill in the field if you want to use a static IP address to access the Internet.
Page 101 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 77. The page for creating a new Pv6 PPPoE connection. The IPv6 DNS addresses section.
Page 102 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 78. The page for creating a new Pv6 PPPoE connection. The Miscellaneous section.
Page 103: Creating Static Ip Or Dynamic Ip Wan Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Creating Static IP or Dynamic IP WAN Connection To create a connection of the Static IP or Dynamic IP type, click the Add button on the Net / WAN page.
Page 104 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 80. The page for creating a new Static IP connection. The Ethernet section.
Page 105 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 81. The page for creating a new Static IP connection. The IP section.
Page 106 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 82. The page for creating a new Static IP connection. The Authorization via 802.1x protocol section.
Page 107 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 83. The page for creating a new Static IP connection. The Miscellaneous section.
Page 108: Creating Static Ipv6 Or Dynamic Ipv6 Wan Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Creating Static IPv6 or Dynamic IPv6 WAN Connection To create a connection of the Static IPv6 or Dynamic IPv6 type, click the Add button on the Net / WAN page.
Page 109 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 85. The page for creating a new Static IPv6 connection. The Ethernet section.
Page 110 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 86. The page for creating a new Static IPv6 connection. The IP section.
Page 111 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 87. The page for creating a new Static IPv6 connection. The Miscellaneous section.
Page 112: Creating Pppoe + Static Ip Or Pppoe + Dynamic Ip Wan Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Creating PPPoE + Static IP or PPPoE + Dynamic IP WAN Connection To create a connection of the PPPoE + Static IP or PPPoE + Dynamic IP type, click the Add button on the Net / WAN page.
Page 113 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 89. The page for creating a new PPPoE + Static IP connection.
Page 114 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 90. The page for creating a new PPPoE + Static IP connection.
Page 115 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 91. The page for creating a new PPPoE + Static IP connection.
Page 116 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 92. The page for creating a new PPPoE + Static IP connection.
Page 117 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 93. The page for creating a new PPPoE + Static IP connection.
Page 118 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description This option is used by some ISPs. Contact your ISP to clarify if this PPP IP extension checkbox needs to be enabled.
Page 119: Creating Pptp/L2Tp + Static Ip Or Pptp/L2Tp + Dynamic Ip Wan Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Creating PPTP/L2TP + Static IP or PPTP/L2TP + Dynamic IP WAN Connection To create a connection of the PPTP + Static IP, L2TP + Static IP, PPTP + Dynamic IP, or L2TP + Dynamic IP type, click the Add button on the Net / WAN page.
Page 120 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 96. The page for creating a new PPTP + Static IP connection. The Ethernet section.
Page 121 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 97. The page for creating a new PPTP + Static IP connection. The IP section.
Page 122 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 98. The page for creating a new PPTP + Static IP connection. The Authorization via 802.1x protocol section.
Page 123 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 99. The page for creating a new PPTP + Static IP connection. The VPN section.
Page 124 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Select a method of MPPE encryption. No encrypt: MPPE encryption is not applied.
Page 125 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Select the checkbox if you want one WAN IP address to be used for all computers of your LAN.
Page 126: Creating 3G Wan Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Creating 3G WAN Connection If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to creating a 3G WAN connection, proceed to the 3G/LTE modem / PIN menu and enter the PIN code on the page displayed (see the 3G/LTE Modem section, page 202).
Page 127 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 101. The page for creating a new 3G connection. The USB modem section.
Page 128 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description A number dialed to connect to the authorization server of the Dial number operator.
Page 129: Creating Lte Wan Connection
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Creating LTE WAN Connection For the USB modem Megafon M100-1, please reboot the router after creating the WAN connection.
Page 130 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 105. The page for creating a new LTE connection. The USB modem section.
Page 131 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 106. The page for creating a new LTE connection. The IP section.
Page 132: Lan
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual To configure the router's local interface, proceed to the Net / LAN page.
Page 133 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description An operating mode of the router's DHCP server. Enable: the router assigns IP addresses to clients automatically in accordance with the specified parameters.
Page 134 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual In the IPv6 address assignment section, you can configure how clients from the LAN should obtain IPv6 addresses.
Page 135 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual In the Static DHCP section, you can specify MAC address and IP address pairs (set a fixed IPv4 address in the local area network for a device with a certain MAC address).
Page 136: Wi-Fi
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network.
Page 137 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description The checkbox enables Wi-Fi connections in the 2.4GHz. If you want Enable Wireless to disable your WLAN in this band, deselect the checkbox.
Page 138 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Select the checkbox to let the router search for a free channel in Periodic scan certain periods of time.
Page 139: 5Ghz Band
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual 5GHz Band Figure 113. Basic settings of the wireless LAN in the 5GHz band.
Page 140 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description To split the network into several parts in the 5GHz band, select the a relevant value (2, 3, or 4) from the drop-down list.
Page 141 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description The maximum number of devices connected to the wireless network (or the selected part of the network) of the router.
Page 142: Security Settings
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Security Settings On pages of the Wi-Fi / Security settings section, you can modify security settings of the WLAN.
Page 143 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 115. Network authentication types supported by the router. The router supports the following authentication types:...
Page 144 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual The WPA , WPA2 , and WPA/WPA2 mixed authentication types require a RADIUS server.
Page 145 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description The checkbox activating WEP encryption. When the checkbox is...
Page 146 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed value is selected, the WPA Encryption settings section is displayed: Figure 117.
Page 147 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the RADIUS settings and WPA Encryption settings sections are available: Figure 118.
Page 148: Mac Filter
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual When you have configured the parameters, click the Apply button. MAC Filter...
Page 149 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 120. The page for adding a MAC address. You can specify the following parameters:...
Page 150: List Of Wi-Fi Clients
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual List of Wi-Fi Clients On the Wi-Fi / List of Wi-Fi clients page, you can view the list of wireless clients connected to the router.
Page 151: Wps
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On pages of the Wi-Fi / WPS section, you can enable the function for secure configuration of the WLAN and select a method used to easily add wireless devices to the WLAN.
Page 152 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 122. The page for configuring the WPS function. Page 152 of 259...
Page 153 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual To activate the WPS function, select the WPS Enable checkbox on the Wi-Fi / WPS/ 2.4 GHz or Wi-Fi / WPS / 5 GHz page and click the Apply button.
Page 154: Using Wps Function Via Web-Based Interface
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Using WPS Function via Web-based Interface To add a wireless device via the PIN method of the WPS function, follow the next steps: 1.
Page 155 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Later you will be able to add wireless devices to the WLAN by pressing the WPS button of the router.
Page 156: Additional Settings
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Additional Settings On pages of the Wi-Fi / Additional settings section, you can define additional parameters for the WLAN of the router.
Page 157 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description The time period (in seconds) between sending a DTIM (a message...
Page 158 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Guard interval (in nanoseconds). This parameter defines the interval between symbols transmitted when the router is communicating to wireless devices.
Page 159: Wmm
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function.
Page 160 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameters of the Access Categories are defined for both the router itself (in the Parameters of Access Point section) and wireless devices connected to it (in the Parameters of Station section).
Page 161: Client
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point.
Page 162 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual To configure the router as a client, select the Enable client checkbox. When the checkbox is...
Page 163 WiFiClient interface. The step-by-step description of how to configure the router as a wireless client is available on D-Link website. To access it, click the Configuring router in wireless client mode link in the top part of the page.
Page 164: Advanced
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Advanced In this menu you can configure advanced settings of the router: create groups of ports for VLANs •...
Page 165: Vlan
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual VLAN On the Advanced / VLAN page, you can create and edit groups of ports for virtual networks (VLANs).
Page 166 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 127. The page for adding a group of ports for VLAN.
Page 167 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description A priority tag for the type of traffic transmitted.
Page 168: Upnp Igd
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual UPnP IGD On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The router uses the UPnP IGD protocol for automatic configuration of its parameters for network applications requiring an incoming connection to the router.
Page 169: Etherwan
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual EtherWAN On the Advanced / EtherWAN page, you can configure the router to connect to a private Ethernet line.
Page 170: Port Settings
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Port Settings On the Advanced / Port settings page, you can configure or disable autonegotiation of speed and duplex mode or manually configure speed and duplex mode for each Ethernet port of the router.
Page 171 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 131. The page for changing the settings of the router's port.
Page 172: Flow Control
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description 100M-Half: Data transfer in just one direction at a time (data •...
Page 173: Redirect
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Redirect On the Advanced / Redirect page, you can enable notifications on the reason of the Internet connection failure.
Page 174: Ddns
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses.
Page 175 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual You can specify the following parameters: Parameter Description The domain name registered at your DDNS provider. The field will Full host name be filled in automatically.
Page 176: Dns
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On the Advanced / DNS page, you can add DNS servers to the system.
Page 177: Routing
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Routing On the Advanced / Routing page, you can add static routes (routes for networks that are not connected directly to the device but are available through the interfaces of the device) into the system.
Page 178 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual To edit an existing route, select a needed field in the relevant line of the table, change its value, and click the Apply button.
Page 179: Ipv6 Routing
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual IPv6 Routing On the Advanced / IPv6 routing page, you can add static routes (routes for networks that are not connected directly to the device but are available through the interfaces of the device) into the system.
Page 180 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Select an interface through which the destination network can be accessed from the drop-down list.
Page 181: Remote Access To Device
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Remote Access to Device On the Advanced / Remote access to device page, you can configure access to the web-based interface of the router.
Page 182 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 139. The page for adding a rule for remote management.
Page 183 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual To remove a rule for remote access, select the checkbox located to the left of the relevant line in the table and click the Delete button.
Page 184: Miscellaneous
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Miscellaneous On the Advanced / Miscellaneous page, you can allow the router to use IGMP and RTSP, enable the SIP ALG function and the PPPoE/PPTP/L2TP/IPSec pass through functions.
Page 185 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual The following elements are available on the page: Parameter Description Select a version of IGMP from the drop-down list to enable IGMP.
Page 186: Tr-069 Client
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual TR-069 Client On the Advanced / TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS).
Page 187 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Enable TR-069 Client Select the checkbox to enable the TR-069 client.
Page 188: Ipsec
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual IPsec On the Advanced / IPsec page, you can configure VPN tunnels based on IPsec protocol.
Page 189 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 143. The page for adding an IPsec tunnel. You can specify the following parameters:...
Page 190 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Select a WAN connection through which the tunnel will pass. When Interface the <auto>...
Page 191 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Maximum Segment Size of a TCP packet. This parameter influences the size of a TCP packet which will be sent from a remote host to the router.
Page 192 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description First phase DHgroup A Diffie-Hellman key group for Phase 1. Select a value from the drop- type down list.
Page 193 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual To edit fields in the Tunneled networks section, select a needed field in the relevant line of the table and change its value.
Page 194: Firewall
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Firewall In this menu you can configure the firewall of the router: add rules for IP filtering •...
Page 195 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 147. The page for adding a rule for IP filtering.
Page 196 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description IP Addresses The source host/subnet IP address. To choose a device connected to the router's LAN at the moment,...
Page 197: Virtual Servers
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Virtual Servers On the Firewall / Virtual servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
Page 198 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual You can specify the following parameters: Parameter Description Select a virtual server template from the drop-down list, or select...
Page 199: Dmz
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks.
Page 200: Mac Filter
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual MAC Filter On the Firewall / MAC filter page, you can configure MAC-address-based filtering for computers of the router's LAN.
Page 201 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual You can specify the following parameters: Parameter Description The MAC address of a device from the router's LAN. You can enter...
Page 202: 3G/Lte Modem
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual 3G/LTE Modem This menu is designed to operate USB modems. If the PIN code check for the SIM card inserted into your USB modem is not disabled, proceed to the 3G/LTE modem / PIN section.
Page 203: Settings
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Settings On the 3G/LTE modem / Settings page, you can enable/disable the function for automatic creation of 3G/LTE WAN connection upon plugging a USB modem into the router Figure 154.
Page 204: Information
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Information On the 3G/LTE modem / Information page, you can view data on the USB modem connected to the router.
Page 205: Pin
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On pages of the 3G/LTE modem / PIN section, you can change the PIN code of the identification card inserted into your USB modem, disable or enable the check of the PIN code.
Page 206 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 157. The 3G/LTE modem / PIN / Changing PIN code page.
Page 207: Usb Storage
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual USB Storage This menu is designed to operate USB storages. Here you can do the following: view data on the connected USB storage •...
Page 208: Filebrowser
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual To disconnect one volume of the storage, select the needed value from the USB storage drop- down list and click the Unmount volume button.
Page 209: Print Server
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Print Server On the USB storage / Print-server page, you can configure the router as a print server. Being configured in this way, the router will allow your LAN users to share the printer connected to the USB port of the router.
Page 210: Samba
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Samba On the USB storage / Samba page, you can enable the built-in Samba server of the router to provide access to the USB storage for users of your LAN.
Page 211: Ftp
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On the USB storage / FTP page, you can enable the built-in FTP server of the router to provide access to the USB storage for users of your LAN.
Page 212: Dlna
60 seconds. In the DLNA server name field, specify a new name of the DLNA server for easier identification in your LAN or leave the value specified by default (D-Link DLNA Server). Use digits and/or Latin characters.
Page 213 Apply button. The step-by-step description of how to configure the DLNA server of the router is available on D-Link website. To access it, click the Setting up DLNA server on the router link in the top part of the page.
Page 214: Transmission
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Transmission In this menu you can configure the built-in Transmission torrent client and manage distributing and downloading processes.
Page 215 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description The folder on the USB storage where files of the Transmission client Torrents directory will be stored.
Page 216 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 165. The web-based interface of the Transmission torrent client. Using the web-based interface of the built-in Transmission torrent client you can manage the process of downloading files to the USB storage connected to the router.
Page 217: Control
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Control This menu is designed to create restrictions on access to certain web sites.
Page 218 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 167. The Control / URL filter / URL addresses page.
Page 219: Voip
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual VoIP In this menu you can configure all parameters essential for VoIP via SIP and specify all needed settings for the phone connected to the router.
Page 220 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description When this field is filled in, the router registers on the SIP proxy SIP domain name server using the specified domain name.
Page 221 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 169. The VoIP / Basic settings page. The SIP lines section.
Page 222: Advanced Settings
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Advanced Settings On the VoIP / Advanced settings page, you can specify additional settings for VoIP via SIP.
Page 223 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description The FLASH action type. Transfer: switching between calls. Flash type •...
Page 224 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description T.38 Select the checkbox to let the router support operation with Support SoftX3000 SoftX3000.
Page 225 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Figure 171. The VoIP / Advanced settings page. The STUN server, Caller ID, PSTN options, and Network settings sections.
Page 226: Network Settings
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Network settings Differentiated Services Codepoint. RTP DSCP / SIP DSCP From the relevant drop-down list, select tags for voice and signaling traffic.
Page 227 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description A number to which the router redirects calls in accordance with the Call forwarding number mode selected from the Forwarding list.
Page 228 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Fill in the field to allow the user of the phone to make calls only PIN code to dial after dialing the PIN code.
Page 229: Audio Settings
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Audio Settings On the VoIP / Audio settings page you can configure audio parameters, volume and voice codecs.
Page 230 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Echo Tail Maximum echo tail length (in milliseconds). Figure 174. The VoIP / Audio settings page. The Volume settings and Codecs settings section.
Page 231: Phone Book
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Phone Book On the VoIP / Phone book page, you can fill in the phone book for devices connected to the FXS ports of the router.
Page 232 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual In the Abbreviated dial section, you can assign short numbers (as a rule, such numbers consist of two or three digits) to frequently used phone numbers.
Page 233: Call Feature Code
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Call Feature Code On the VoIP / Call feature code page, you can allow changing some parameters of the router directly from the phone sets connected to the FXS ports of the router.
Page 234 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Disable Call Forwarding On Busy Disables call forwarding when this line is busy.
Page 235: Alarm Clock
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Alarm Clock On the VoIP / Alarm clock page, you can configure the phones connected to the FXS ports of the router as alarm clocks.
Page 236: Security
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Security On the VoIP / Security page, you can configure filtering rules for incoming calls of the phones connected to the FXS ports of the router.
Page 237: System
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual System In this menu you can do the following: change the password used to access the router's settings •...
Page 238: Administrator Password
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Administrator Password On the System / Administrator password page, you can change the password for the administrator account used to access the web-based interface of the router and to access the device settings via TELNET.
Page 239: Configuration
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Configuration On the System / Configuration page, you can reboot the device, save the changed settings to the non-volatile memory, restore the factory defaults, backup the current configuration, or restore the router's configuration from a previously created file.
Page 240 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual The following buttons are available on the page: Control Description Click the button to save settings to the non-volatile memory. Please, save settings every time you change the router's parameters.
Page 241: System Log
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual System Log On the System / System log / Configuration page, you can set the system log options and configure sending the system log to a remote host and/or a USB storage connected to the router.
Page 242 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Parameter Description Logging level Select a type of messages and alerts/notifications to be logged.
Page 243 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual the System / System log / Log page, the events specified in the Logging level list are displayed.
Page 244: Firmware Upgrade
Figure 183. The System / Firmware upgrade page. The current version of the router's firmware is displayed next the D-Link logo in the top left corner of the page. By default, the automatic check for the router's firmware updates is enabled. If a firmware update is available, a notification will be displayed in the top right corner of the page.
Page 245: Local Update
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Local Update Attention! Do not turn off the router before the firmware upgrade is completed. This may cause the device breakdown.
Page 246: Remote Update
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Remote Update Attention! Do not turn off the router before the firmware upgrade is completed. This may cause the device breakdown.
Page 247: System Time
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual System Time On the System / System time page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.
Page 248 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual After clicking the Apply button, the date and time set for the router will be displayed in the System date and System time fields.
Page 249: Ping
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility.
Page 250: Traceroute
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Traceroute On the System / Traceroute page, you can determine the route of data transfer to a host via the traceroute utility.
Page 251: Telnet
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Telnet On the System / Telnet page, you can enable or disable access to the device settings via TELNET from your LAN.
Page 252: Usb Users
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual USB Users On the System / USB users page, you can create user accounts to provide access to data on the USB storage connected to the router.
Page 253 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual On the opened page, in the Login field, specify a username, and in the Password and Password confirmation fields –...
Page 254: Interface Settings
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Configuring via Web-based Interface (lifeline) Port, and USB Port User Manual Interface Settings On the System / Interface settings page, you can configure the interface language and specify an idle period at the end of which the session with the interface is completed.
Page 255: Chapter 5. Operation Guidelines
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Operation Guidelines (lifeline) Port, and USB Port User Manual CHAPTER 5. OPERATION GUIDELINES Safety Rules and Conditions Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged.
Page 256: Wireless Installation Considerations
RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DVG-N5402G/ACF device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3-90 feet (1-30 meters).
Page 257: Chapter 6. Abbreviations And Acronyms
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Abbreviations and Acronyms (lifeline) Port, and USB Port User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Third Generation Access Category Advanced Encryption Standard...
Page 258 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Abbreviations and Acronyms (lifeline) Port, and USB Port User Manual Network Address Translation Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing Push Button Configuration...
Page 259 DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN Abbreviations and Acronyms (lifeline) Port, and USB Port User Manual Wired Equivalent Privacy Wi-Fi Wireless Fidelity WLAN Wireless Local Area Network Wi-Fi Multimedia...

D-Link DVG-N5402G/ACF User Manual

Chapter 1. Introduction

Chapter 2. Overview

Chapter 3. Installation and Connection

Chapter 4. Configuring Via Web-Based Interface

Chapter 5. Operation Guidelines

Chapter 6. Abbreviations and Acronyms

Quick Links

Related Manuals for D-Link DVG-N5402G/ACF

Summary of Contents for D-Link DVG-N5402G/ACF

Table of Contents