Table of Contents
Advertisement
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
Parameter
Dial on demand
PPP IP extension
PPP debug
Figure 72. The page for creating a new
Parameter
Get IPv6
Gateway by SLAAC
Gateway IPv6 address
Obtain DNS server
addresses
automatically
Move the switch to the right if you want the router to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
This option is used by some ISPs. Contact your ISP to clarify if this
option needs to be enabled. If it is required, move the switch to the
right.
Move the switch to the right if you want to log
connection debugging.
PPPoE Pv6
IP
Select a method for IPv6 address assignment from the drop-down
list or leave the Automatically value.
Move the switch to the right to automatically assign the IPv6
gateway address with help of SLAAC (Stateless Address
Autoconfiguration).
The address of the IPv6 gateway. The field is available for editing if
the Gateway by SLAAC switch is moved to the left.
Move the switch to the right to configure automatic assignment of
IPv6 DNS server addresses. Upon that the Primary IPv6 DNS
server and Secondary IPv6 DNS server fields are not available
for editing.
Page 90 of 244
Configuring via Web-based Interface
Description
connection. The IP section.
Description
all data on PPP
Advertisement
Table of Contents
