Chapter 4. Configuring Via Web-Based Interface; Status; Network Statistics - D-Link DSL-2750U User Manual

3g/adsl/ethernet router with wi-fi and built-in switch

Hide thumbs Also See for DSL-2750U:

Table of Contents

DSL-2750U 3G/ADSL/Ethernet Router with

Wi-Fi and Built-in Switch

User Manual

CHAPTER 4.

INTERFACE

This menu displays data on the current state of the router. The following data are represented:

connection status, active WAN connections, IP addresses leased by DHCP server, the routing table,

network statistics, and data on network devices connected to the router.

On the Status / Network statistics page, you can view statistics for all interfaces (connections)

existing in the system. For each connection the following data are displayed: state, IP address,

subnet mask and gateway (if the connection is established), MAC address, MTU value, and volume

of data received and transmitted (with increase of the volume the units of measurement are changed

automatically: byte, Kbyte, Mbyte, Gbyte).

CONFIGURING

Figure 13. The Status / Network statistics page.

Page 20 of 110

Configuring via Web-based Interface

VIA

WEB-BASED

DSL

Table of Contents