Page 1 User Manual DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, and USB Port December, 2020...
Page 2: Table Of Contents
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, and USB Port User Manual Contents Chapter 1. Introduction.........6 Contents and Audience............6 Conventions..............6 Document Structure............6 Chapter 2. Overview..........7 General Information............7 Specifications..............9 Product Appearance............17 Upper Panel..............17...
Page 3 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, and USB Port User Manual Statistics..............76 Network Statistics............76 DHCP..............77 Routing..............78 Clients and Session............80 Port Statistics............81 Multicast Groups............82 Connections Setup............83 WAN..............83 Creating Dynamic IPv4 or Static IPv4 WAN Connection....85 Creating Dynamic IPv6 or Static IPv6 WAN Connection....88...
Page 4 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, and USB Port User Manual Advanced..............197 VLAN..............198 Interface Grouping............201 WAN Remapping............203 DNS..............204 DDNS..............206 Ports Settings............208 Redirect..............211 Routing..............212 TR-069 Client............214 Remote Access............216 UPnP IGD..............218 UDPXY..............219...
Page 5 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, and USB Port User Manual Chapter 5. Operation Guidelines.......306 Safety Rules and Conditions..........306 Wireless Installation Considerations........307 Chapter 6. Abbreviations and Acronyms......308 Page 5 of 311...
Page 6: Chapter 1. Introduction
Chapter 2 gives an overview of the router's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the router DVG-5402G/GF and configure a PC in order to access its web-based interface. Chapter 4 describes all pages of the web-based interface in detail.
Page 7: Chapter 2. Overview
Internet, but will be isolated from the devices and resources of the router's LAN. 1 Not included in the delivery package. D-Link does not guarantee compatibility with all USB modems. For the list of supported USB modems, see the Specifications section, page 9.
Page 8 You can configure the settings of the wireless router DVG-5402G/GF via the user-friendly web- based interface (the interface is available in several languages).
Page 9: Specifications
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Overview Ports, and USB Port User Manual Specifications Hardware Processor · RTL9607C (900MHz) · 256MB, DDR3, built in processor Flash · 128MB, SPI NAND Interfaces ·...
Page 10 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Overview Ports, and USB Port User Manual Software Network functions · DHCP server/relay · Advanced configuration of built-in DHCP server · Stateful/Stateless mode for IPv6 address assignment, IPv6 prefix delegation ·...
Page 11 SSH/TELNET/WEB (HTTP/HTTPS) · Multilingual web-based interface for configuration and management · Support of D-Link Assistant application for Android and iPhone smartphones · Notification on connection problems and auto redirect to settings · Firmware update via web-based interface · Automatic notification on new firmware version ·...
Page 12 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Overview Ports, and USB Port User Manual Wireless Module Parameters Advanced functions · Support of client mode · WMM (Wi-Fi QoS) · Information on connected Wi-Fi clients ·...
Page 13 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Overview Ports, and USB Port User Manual Wireless Module Parameters · 802.11g (typical at PER < 10% at room temperature 25 °C) -82dBm at 6Mbps...
Page 14 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Overview Ports, and USB Port User Manual Phone Call Features · Direct IP-to-IP сall without SIP proxy (P2P) · Call hold/retrieve · Call awaiting ·...
Page 15 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Overview Ports, and USB Port User Manual Supported USB modems · Alcatel X500 · D-Link DWM-152C1 · D-Link DWM-156A6 · D-Link DWM-156A7 · D-Link DWM 156A8 ·...
Page 16 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Overview Ports, and USB Port User Manual Supported USB modems · Alcatel IK40V · D-Link DWM-222 · Huawei E3131 · Huawei E3272 · Huawei E3351 ·...
Page 17: Product Appearance
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Overview Ports, and USB Port User Manual Product Appearance Upper Panel Figure 1. Upper panel view. Mode Description The router is powered on. Solid green The firmware is being updated.
Page 18 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Overview Ports, and USB Port User Manual Mode Description A device is connected to the port of the router (for the LAN port configured as the WAN port: the router is Solid green connected to an Ethernet line).
Page 19: Side Panel
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Overview Ports, and USB Port User Manual Side Panel Figure 2. Side panel view. Name Description A button to restore the factory defaults. RESET To restore the factory defaults, push the button (with the device turned on), hold it for 10 seconds, and then release the button.
Page 20 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Overview Ports, and USB Port User Manual Name Description A button to set up a wireless connection (the WPS function). To use the WPS function: with the device turned on, push the button, hold it for 2 seconds, and release.
Page 21: Back Panel
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Overview Ports, and USB Port User Manual Back Panel Figure 3. Back panel view. Port Description An optical port to connect to a fiber optic line.
Page 22: Delivery Package
• “Quick Installation Guide” (brochure). • The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
Page 23: Chapter 3. Installation And Connection
(hereinafter referred to as “the router”) is performed via the built-in web-based interface. The web- based interface is available from any operating system that supports a web browser. Also you can use D-Link Assistant application for Android or iPhone mobile devices (smartphones or tablets).
Page 24 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual USB Modem To connect to an LTE or 3G network, you should use a USB modem. Connect it to the USB port of...
Page 25: Connecting To Pc
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual Connecting to PC PC with Ethernet Adapter 1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
Page 26: Obtaining Ip Address Automatically (Os Windows 7)
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual Obtaining IP Address Automatically (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window.
Page 27 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line.
Page 28 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
Page 29 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.
Page 30 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 31: Obtaining Ip Address Automatically (Os Windows 10)
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual Obtaining IP Address Automatically (OS Windows 10) 1. Click the Start button and proceed to the Settings window.
Page 32 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual 3. In the Change your network settings section, select the Change adapter options line. Figure 10. The Network & Internet window.
Page 33 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
Page 34 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.
Page 35 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 36: Pc With Wi-Fi Adapter
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual PC with Wi-Fi Adapter 1. To connect the device to a fiber optic line: connect your SFP transceiver to the SFP port, then connect the fiber optic cable to the SFP transceiver.
Page 37: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 7)
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual Obtaining IP Address Automatically and Connecting to Wireless Network (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window.
Page 38 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 39 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DVG- 5402G (for operating in the 2.4GHz band) or DVG-5402G-5G (for operating in the 5GHz band) and click the Connect button. Figure 17. The list of available networks.
Page 40: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 10)
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual Obtaining IP Address Automatically and Connecting to Wireless Network (OS Windows 10) 1. Click the Start button and proceed to the Settings window.
Page 41 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 42 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DVG- 5402G (for operating in the 2.4GHz band) or DVG-5402G-5G (for operating in the 5GHz band) and click the Connect button. Figure 21. The list of available networks.
Page 43: Connecting To Web-Based Interface
(create a WAN connection, change the parameters of the wireless network, specify the settings of the firewall, etc.). For security reasons, DVG-5402G/GF with default settings cannot connect to the Internet. To get started, please set your own password used to access the web-based interface and, if needed, configure other settings recommended by your ISP.
Page 44 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual If you configured the device previously, after access to the web-based interface the login page opens.
Page 45: Web-Based Interface Structure
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual Web-based Interface Structure Summary Page On the Summary page, detailed information on the device state is displayed.
Page 46 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual The Device Information section displays the model and hardware version of the router, the firmware version, and other data.
Page 47: Home Page
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual Home Page The Home page displays links to the most frequently used pages with device's settings.
Page 48: Menu Sections
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual Menu Sections To configure the router use the menu in the left part of the page.
Page 49: Notifications
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Installation and Connection Ports, and USB Port User Manual Notifications The router's web-based interface displays notifications in the top right part of the page.
Page 50: Configuring Via Web-Based Interface
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you are connected to the wireless network of DVG-5402G/GF (see the WLAN name (SSID) on the barcode label on the bottom panel of the device) and click the NEXT button.
Page 51 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual On the opened page, click YES in order to leave the current language of the web-based interface or click NO to select another language.
Page 52: Selecting Operation Mode
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Selecting Operation Mode Select the needed operation mode and click the NEXT button. Router In order to connect your device to a fiber optic line, on the Device mode page, from the Connection method list, select the Fiber (SFP) value.
Page 53 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In order to connect your device to a private Ethernet line, on the Device mode page, from the Connection method list, select the Ethernet (LAN) value.
Page 54 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the Connection method list, select the Wi-Fi value.
Page 55: Access Point Or Repeater
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Access Point or Repeater In order to connect your device to a wired router for adding a wireless network to the existing local network, on the Device mode page, from the Connection method list, select the Ethernet (LAN) value.
Page 56 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In order to let wired PCs connected to your device access the network of a wireless router, on the Device mode page, from the Connection method list, select the Wi-Fi value.
Page 57: Configuring Lan Port As Wan Port
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Configuring LAN Port as WAN Port This configuration step is available for the Router mode.
Page 58: Creating 3G/Lte Wan Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Creating 3G/LTE WAN Connection This configuration step is available for the Mobile Internet mode.
Page 59 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual If the router failed to create a WAN connection automatically, click the CONFIGURE MANUALLY button. On the...
Page 60: Changing Lan Ipv4 Address
If you want to manually assign the LAN IPv4 address for DVG-5402G/GF, do not select the Automatic obtainment of IPv4 address checkbox and fill in the IP address, Subnet mask, DNS IP address, Hostname fields and, if needed, the Gateway IP address field.
Page 61: Wi-Fi Client
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Wi-Fi Client This configuration step is available for the WISP Repeater, Repeater, and Client modes.
Page 62 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual When the Open or WEP authentication type is selected, the following settings are displayed on the...
Page 63: Configuring Wired Wan Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Configuring Wired WAN Connection This configuration step is available for the Fiber (SFP), Router, and WISP Repeater modes.
Page 64: Static Ipv4 Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Static IPv4 Connection Figure 46. The page for configuring Static IPv4 WAN connection. Fill in the following fields: IP address, Subnet mask, Gateway IP address, and DNS IP address.
Page 65: Static Ipv6 Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Static IPv6 Connection Figure 47. The page for configuring Static IPv6 WAN connection. Fill in the following fields: IP address, Prefix, Gateway IP address, and DNS IP address.
Page 66: Pppoe, Ipv6 Pppoe, Pppoe Dual Stack, Pppoe + Dynamic Ip (Pppoe Dual Access) Connections
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual PPPoE, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access) Connections Figure 48.
Page 67: Pppoe + Static Ip (Pppoe Dual Access) Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual PPPoE + Static IP (PPPoE Dual Access) Connection Figure 49. The page for configuring PPPoE + Static IP (PPPoE Dual Access) WAN connection.
Page 68: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 50. The page for configuring PPTP + Dynamic IP WAN connection.
Page 69: Pptp + Static Ip Or L2Tp + Static Ip Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual PPTP + Static IP or L2TP + Static IP Connection Figure 51. The page for configuring PPTP + Static IP WAN connection.
Page 70: Configuring Wireless Network
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Configuring Wireless Network This configuration step is available for the Mobile Internet, Fiber (SFP), Router, Access point, WISP Repeater, and Repeater modes.
Page 71 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual 5. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz band, select the Enable guest network checkbox (available for the Mobile Internet, Fiber (SFP), Router, and WISP Repeater modes only).
Page 72: Configuring Lan Ports For Iptv/Voip
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Configuring LAN Ports for IPTV/VoIP This configuration step is available for the Router mode.
Page 73 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual On the VoIP page, select the Is an IP phone connected to the device checkbox.
Page 74: Changing Web-Based Interface Password
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Changing Web-based Interface Password On this page, you should change the default administrator password. To do this, enter a new password in the User’s interface password and Password confirmation fields.
Page 75 If problems of connection have not been solved, contact the technical support of your ISP (as a rule, the technical support phone is provided with the agreement) or the D-Link technical support (the phone number will be displayed on the page after several attempts of checking the connection).
Page 76: Statistics
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Statistics The pages of this section display data on the current state of the router: network statistics •...
Page 77: Dhcp
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual DHCP The Statistics / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as well as the IP address expiration periods (the lease time).
Page 78: Routing
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Routing The Statistics / Routing page displays the routing rules and routing tables. Figure 60. The Statistics / Routing page.
Page 79 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 61. The routing table page. The opened page displays the information on routes in the selected routing table. The table contains destination IP addresses, gateways, subnet masks, and other data.
Page 80: Clients And Session
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Clients and Session On the Statistics / Clients and Session page, you can view the list of devices connected to the local network of the router and information on current sessions of each device.
Page 81: Port Statistics
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Port Statistics On the Statistics / Port Statistics page, you can view statistics for traffic passing through ports of the router.
Page 82: Multicast Groups
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Multicast Groups The Statistics / Multicast Groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.
Page 83: Connections Setup
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Connections Setup In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection).
Page 84 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 66. The Connections Setup / WAN page. The advanced mode. To create a new connection, click the ADD button ( ) in the Connections List section.
Page 85: Creating Dynamic Ipv4 Or Static Ipv4 Wan Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Creating Dynamic IPv4 or Static IPv4 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 86 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Move the switch to the right to allow using RIP for this connection.
Page 87 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 69. The page for creating a new Static IPv4 connection. The IPv4 section.
Page 88: Creating Dynamic Ipv6 Or Static Ipv6 Wan Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Creating Dynamic IPv6 or Static IPv6 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 89 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 71. The page for creating a new Static IPv6 connection. The Ethernet section.
Page 90 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description IPv6 For Static IPv6 type IPv6 address Enter an IPv6 address for this WAN connection.
Page 91: Creating Pppoe Wan Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Creating PPPoE WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 92 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 74. The page for creating a new PPPoE connection. The Ethernet section. Parameter...
Page 93 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 75. The page for creating a new PPPoE connection. The PPP section. Parameter...
Page 94 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied.
Page 95 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 76. The page for creating a new PPPoE connection. The IPv4 section. Parameter...
Page 96: Creating Pptp, L2Tp, Or L2Tp Over Ipsec Wan Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Creating PPTP, L2TP, or L2TP over IPsec WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 97 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 78. The page for creating a new PPTP connection. The PPP section. Parameter...
Page 98 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied.
Page 99 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 79. The page for creating a new PPTP connection. The IPv4 section. Parameter...
Page 100 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual After clicking the button, the window for additional configuration of the connection opens. If you want to use this WAN connection to access the Internet, select the to the Internet choice of the radio button.
Page 101: Creating Pppoe Ipv6 Or Pppoe Dual Stack Wan Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 102 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 82. The page for creating a new PPPoE IPv6 connection. The Ethernet section.
Page 103 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 83. The page for creating a new PPPoE IPv6 connection. The PPP section.
Page 104 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied.
Page 105 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 84. The page for creating a new PPPoE Dual Stack connection. The IPv4 section.
Page 106 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Move the switch to the right to configure automatic assignment of Obtain DNS server IPv6 DNS server addresses.
Page 107: Creating Mobile Internet Wan Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Creating Mobile Internet WAN Connection If the PIN code check is enabled for the SIM card inserted into your USB modem, for correct...
Page 108 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description If the switch is moved to the right, the router responds to ping Ping requests from the external network through this connection.
Page 109 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Move the switch to the right if your operator does not require Without authorization authorization.
Page 110 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Move the switch to the right if you want to log all data on PPP PPP debug connection debugging.
Page 111 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description IP addresses from the external network that the router will check for availability via ICMP ping mechanism.
Page 112: Creating Bridge Wan Connection
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Creating Bridge WAN Connection On the connection creation page, go to the General Settings tab. Then select the relevant value from the Connection type drop-down list and specify the needed values.
Page 113 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 91. The page for creating a new Bridge connection. The Ethernet section. Parameter...
Page 114: Lan
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To configure the router's local interface, go to the Connections Setup / LAN page.
Page 115 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Available if the Access point, Repeater, or Client mode was selected in the Setup Wizard.
Page 116 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Dynamic IP Addresses An operating mode of the router's DHCP server. Disable: The router's DHCP server is disabled, clients' IP •...
Page 117 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Available if the Fiber (SFP), Router, WISP Repeater, or Mobile Internet mode was selected in the Setup Wizard.
Page 118 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description From the drop-down list, select an option which you want to Known DHCP options configure.
Page 119 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To remove a MAC-IPv4 pair, select the checkbox located to the left of the relevant line in the table and click the DELETE button ( ).
Page 120: Ipv6
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual IPv6 Go to the IPv6 tab to change or add the IPv6 address of the router, configure IPv6 addresses assignment settings, specify MAC address and IPv6 address pairs, or add own DNS records.
Page 121 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the Dynamic IPv6 Addresses section, you can configure IPv6 addresses assignment settings. Figure 100. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
Page 122 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the Static IP Addresses section, you can specify MAC address and IPv6 address pairs (set a fixed IPv6 address in the local area network for a device with a certain MAC address).
Page 123 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To edit an existing record, in the Hosts section, select the relevant line in the table. In the opened window, change the needed parameters and click the SAVE button.
Page 124: Wan Reservation
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual WAN Reservation On the Connections Setup / WAN Reservation page, you can enable the WAN backup function, which provides you with uninterrupted access to the Internet.
Page 125 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the Connections IPv4 section, the existing IPv4 connections are displayed in order of their priority.
Page 126 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the Check with ping section, specify settings of checking the connection using ICMP ping mechanism.
Page 127: Auto Configuration Of 3G/Lte
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Auto Configuration of 3G/LTE On the Connections Setup / Auto Configuration of 3G/LTE page, you can enable the function for automatic creation of a mobile WAN connection upon plugging a USB modem into the router.
Page 128 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual If the PIN code check for the SIM card inserted into your USB modem is disabled, then an active WAN connection with the operator's settings will be automatically created when plugging the USB modem into the router.
Page 129: Traffic Balancing
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Traffic Balancing On the Connections Setup / Traffic balancing page, you can enable the traffic balancing function.
Page 130 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the opened window, specify the needed parameters. Parameter Description From the drop-down list, select a WAN connection to which traffic Connection balancing will be applied.
Page 131: Vpn
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In this menu you can configure VPN connections based on IPsec/GRE/EoGRE protocols. IPsec On the VPN / IPsec page, you can configure VPN tunnels based on IPsec protocol.
Page 132 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To create a new tunnel, click the ADD button ( ) in the Tunnels section.
Page 133 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual You can specify the following parameters: Parameter Description Move the switch to the right to enable the tunnel.
Page 134 Parameter Description The NAT Traversal function allows VPN traffic to pass through the NAT-enabled device. DVG-5402G/GF allows to forcibly encapsulate VPN traffic in UDP packets for passing through a remote device regardless of whether it supports address translation. NAT Traversal If you need to enable forced encapsulation of VPN traffic, select the Enabled value.
Page 135 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Maximum Segment Size of a TCP packet. This parameter influences the size of a TCP packet which will be sent from the remote host to the router.
Page 136 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Hashing algorithm Select a hashing algorithm from the drop-down list. First phase DHgroup A Diffie-Hellman key group for Phase 1.
Page 137 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual If the IPsec tunnel operates over IKEv2 (2 is selected from the IKE version list in the The First Phase section), you can create several subnets.
Page 138: Gre
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual On the VPN / GRE page, you can configure VPN tunnels based on GRE protocol.
Page 139 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 113. The page for adding a GRE tunnel. You can specify the following parameters:...
Page 140 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Remote IP Enter the public IP address of the remote subnet VPN gateway.
Page 141: Eogre
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual EoGRE On the VPN / EoGRE page, you can configure VPN tunnels based on EoGRE technology.
Page 142 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual You can specify the following parameters: Parameter Description Move the switch to the right to enable the EoGRE tunnel.
Page 143: Wi-Fi
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network.
Page 144 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the Basic Settings section, the following parameters are available: Parameter Description To enable Wi-Fi connection, move the switch to the right.
Page 145 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Move the switch to the right to let the router search for a free Enable periodic channel in certain periods of time.
Page 146 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Wi-Fi Network Network name (SSID) A name for the wireless network. If the switch is moved to the right, other users cannot see your Wi-Fi Hide SSID network.
Page 147 Parameter Description If the wireless network broadcasting is disabled, devices cannot connect to the wireless network. Upon that DVG-5402G/GF can connect to another access point as a wireless client. To enable/disable broadcasting on a schedule, click the Set schedule button ( ).
Page 148 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the Security Settings section, you can change security settings of the wireless network.
Page 149 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Authentication type Description A mixed type of authentication. When this value is selected, devices...
Page 150 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description For Open authentication type only. To activate WEP encryption, move the switch to the right. Upon that...
Page 151 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description A password for WPA encryption. The password can contain digits, Latin letters (uppercase and/or lowercase), and other characters Password PSK available in the US keyboard layout.
Page 152 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the following settings are displayed on the page: Figure 121.
Page 153 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual For WPA2 authentication type only. Protected Management Frames help to improve packet privacy protection for wireless data transmission. Select a value for the wireless network from the drop-down list.
Page 154: Client Management
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Client Management On the Wi-Fi / Client Management page, you can view the list of wireless clients connected to the router.
Page 155: Wps
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a method for connection to the WLAN.
Page 156 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual If you want to disable activating the WPS function via the hardware button, on the tabs of both bands, move the Enable Wi-Fi when WPS function is activated with hardware button switch to the left and make sure that the WPS function is not activated via the web-based interface.
Page 157: Using Wps Function Via Web-Based Interface
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Using WPS Function via Web-based Interface To connect to the basic wireless network via the PIN method of the WPS function, follow the next steps: 1.
Page 158: Using Wps Function Without Web-Based Interface
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Using WPS Function without Web-based Interface You can use the WPS function without accessing the web-based interface of the router. To do this, you need to configure the following router's settings: 1.
Page 159: Wmm
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
Page 160 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual The WMM function allows assigning priorities for four Access Categories (AC): BK (Background), low priority traffic (print jobs, file downloads, etc.).
Page 161 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Transmission Opportunity. The higher the value, the higher is the TXOP Access Category priority.
Page 162: Client
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point or to a WISP.
Page 163 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the Wireless Networks section, the list of available wireless networks is displayed. To view the latest data on available wireless networks, click the UPDATE LIST button.
Page 164 When you have configured the parameters, click the APPLY button. When connecting to a wireless access point, the wireless channel of DVG-5402G/GF will switch to the channel of the access point to which you have connected. In addition, the Connection Information section in which you can view the connection status and the network basic parameters is displayed.
Page 165: Additional
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Additional On page of the Wi-Fi / Additional section, you can define additional parameters for the WLAN of the router.
Page 166 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual The following fields are available on the page: Parameter Description The channel bandwidth for 802.11n standard in the 2.4GHz band (the 2.4 GHz tab).
Page 167 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Available on the 5 GHz tab. Move the switch to the right to enable the DFS (Dynamic Frequency Selection) mechanism.
Page 168 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Guard interval (in nanoseconds). This parameter defines the interval between symbols transmitted when the router is communicating to wireless devices.
Page 169: Mac Filter
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual MAC Filter On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
Page 170 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 129. The window for adding a rule for the MAC filter. You can specify the following parameters:...
Page 171 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual After creating the rules you need to configure the filtering modes. To open the basic or additional wireless network for the devices which MAC addresses are specified on this page and to close the wireless network for all other devices, in the section corresponding to the band (2.4 GHz or 5 GHz), left-click the line of the wireless network.
Page 172: Print Server
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Print Server On the Print Server page, you can configure the router as a print server. Being configured in this way, the router will allow your LAN users to share the printer connected to the USB port of the router.
Page 173: Usb Storage
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual USB Storage This menu is designed to operate USB storages. Here you can do the following: view data on the connected USB storage •...
Page 174: Information
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Information On the USB Storage / Information page, you can view data on the USB storage connected to the router.
Page 175: Usb Users
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual USB Users On the USB Storage / USB Users page, you can create user accounts to provide access to data on the USB storage connected to the router.
Page 176 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To view passwords of all user accounts, move the Show password switch to the right.
Page 177: Samba
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Samba On the USB Storage / Samba page, you can enable the built-in Samba server of the router to provide access to the USB storage for users of your LAN.
Page 178 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To allow access only to a certain folder of the USB storage, click the ADD ( ) button in the Directories section.
Page 179: Ftp
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual On the USB Storage / FTP page, you can enable the built-in FTP server of the router to provide access to the USB storage for users of your LAN.
Page 180 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To allow access to all the content of the USB storage for users of your LAN again, remove the value specified in the Directory field and click the APPLY button.
Page 181: Filebrowser
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Filebrowser On the USB Storage / Filebrowser page, you can view the content of your USB storage connected to the router and remove separate folders and files from the USB storage.
Page 182: Dlna
USB storage, or leave the value specified by default (900). In the DLNA server name field, specify a name of the DLNA server which will be displayed for users of your LAN or leave the value specified by default (D-Link DLNA Server). Use digits and/or Latin characters.
Page 183 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 139. Specifying a media folder. In the opened window, locate a folder containing files. To do this, click the Search icon ( ) in the Path field.
Page 184: Torrent Client
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Torrent Client On the USB Storage / Torrent Client page, you can configure all needed settings for the built-in Transmission client.
Page 185 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Locate data of the Transmission client. To do this, click the Search...
Page 186 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the Web-interface page field, the address of the web-based interface of the Transmission client is displayed.
Page 187 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Click the button to restart all downloads. If you limited the maximum number of simultaneous downloads, the Transmission client starts processing of the specified number of torrent files;...
Page 188: Xupnpd
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual XUPNPD On the USB Storage / XUPNPD page, you can enable the XUPNPD plug-in. It allows to broadcast media content received from the Internet sources or IPTV service to DLNA-certified devices of your LAN.
Page 189 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the Service field, the address of the web-based interface of the XUPNPD plug-in is displayed.
Page 190: Usb Modem
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual USB Modem This menu is designed to operate USB modems. Some models of USB modems do not allow performing operations available in this menu section through the web-based interface of the router.
Page 191: Basic Settings
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Basic Settings On the USB Modem / Modem name / Basic Settings page, you can view data on the USB modem connected to the router, change the PIN code of the SIM card inserted into your USB modem, disable or enable the check of the PIN code.
Page 192 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Network information Mode A type of the network to which the USB modem is connected.
Page 193 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual If upon one of the operations described above you have entered an incorrect value in the PIN code field three times (the number of remaining attempts is displayed in the PIN input window), the SIM card inserted into your USB modem is blocked.
Page 194: Sms
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual When a new text message is received, the relevant notification will be displayed in the top right corner of the page.
Page 195 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To create and send a text message, click the New message button ( Figure 150. The window for creating a new text message.
Page 196: Ussd
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual USSD On the USB Modem / Modem name / USSD page, you can send a USSD command.
Page 197: Advanced
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Advanced In this menu you can configure advanced settings of the router: create or edit VLANs •...
Page 198: Vlan
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual VLAN On the Advanced / VLAN page, you can edit existing and create new virtual networks (VLAN), e.g., for distinguishing traffic or specifying additional WAN interfaces.
Page 199 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To create a new VLAN, click the ADD button ( Figure 154. The page for adding a VLAN.
Page 200 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Select a type for the port included in this VLAN. Untagged: Untagged traffic will be transmitted through the •...
Page 201: Interface Grouping
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Interface Grouping On the Advanced / Interface Grouping page, you can create groups consisting of interfaces and ports of the router, for example, for distinguishing different types of traffic.
Page 202 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual On the opened page, you can specify the following parameters: Parameter Description A name for the group for easier identification. You can specify any Name name.
Page 203: Wan Remapping
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual WAN Remapping On the Advanced / WAN Remapping page, you can configure the router to connect to a private Ethernet line.
Page 204: Dns
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual On the Advanced / DNS page, you can add DNS servers to the system.
Page 205 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Specify needed settings for IPv4 in the DNS IPv4 section and for IPv6 in the DNS IPv6 section.
Page 206: Ddns
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses.
Page 207 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual On the opened page, you can specify the following parameters: Parameter Description Move the switch to the right to enable DDNS.
Page 208: Ports Settings
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Ports Settings On the Advanced / Ports Settings page, you can configure or disable autonegotiation of speed and duplex mode or manually configure speed and duplex mode for each Ethernet port of the router.
Page 209 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 162. The window for changing the settings of the router's port. In the opened window, specify the needed parameters:...
Page 210 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Autonegotiation Modes To enable the needed data transfer modes, move relevant switches to the right.
Page 211: Redirect
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Redirect On the Advanced / Redirect page, you can enable notifications on the reason of the Internet connection failure.
Page 212: Routing
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Routing On the Advanced / Routing page, you can specify static (fixed) routes. Figure 164. The Advanced / Routing page.
Page 213 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the route.
Page 214: Tr-069 Client
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual TR-069 Client On the Advanced / TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS).
Page 215 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description The interface which the router uses for communication with the ACS. Leave the Automatic value to let the device select the...
Page 216: Remote Access
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Remote Access On the Advanced / Remote Access page, you can configure access to the web-based interface of the router.
Page 217 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description A name for the rule for easier identification. You can specify any Name name.
Page 218: Upnp Igd
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual UPnP IGD On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The router uses the UPnP IGD protocol for automatic configuration of its parameters for network applications requiring an incoming connection to the router.
Page 219: Udpxy
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual UDPXY On the Advanced / UDPXY page, you can allow the router to use the built-in UDPXY application.
Page 220 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To access the status page of the application, click the Status link. Figure 171. The UDPXY application status page.
Page 221: Igmp
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual IGMP On the Advanced / IGMP page, you can allow the router to use IGMP.
Page 222: Alg/Passthrough
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual ALG/Passthrough On the Advanced / ALG/Passthrough page, you can allow the router to use RTSP, enable the SIP ALG and PPPoE/PPTP/L2TP/IPsec pass through functions.
Page 223 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual The following elements are available on the page: Parameter Description Move the switch to the right to enable SIP. Such a setting allows using the SIP ALG function.
Page 224: Voip
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual VoIP In this menu you can configure all parameters essential for VoIP via SIP and specify all needed settings for the phones connected to the router.
Page 225 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description A connection or a group interfaces of the router for VoIP. Select the needed value from the drop-down list.
Page 226 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To remove an existing profile, select the checkbox located to the left of the relevant line in the table and click the DELETE button ( When all needed settings are configured, click the APPLY button.
Page 227: Advanced Settings
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Advanced Settings On the VoIP / Advanced settings page, you can specify additional settings for VoIP.
Page 228 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Move the switch to the right to enable the Symmetric Response Routing function in accordance with RFC3581. This function allows...
Page 229 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description If the STUN value is selected from the Mode drop-down list, a port of a STUN server to which a connection is established is displayed.
Page 230: Rings
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Rings On the VoIP / Rings page, you can configure ring signal parameters. Figure 178. The VoIP / Rings page.
Page 231 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the opened window, fill in the Signal length and Pause length fields. For each ring, you can specify several variants of signal and pause length in milliseconds which will be used cyclically in the order of their appearance on the page.
Page 232: Security
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Security On the VoIP / Security page, you can configure filtering rules for incoming calls of the phones connected to the FXS ports of the router.
Page 233: Profile Settings
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Profile Settings In this menu section, you can do the following for your profile (Voice profile is created by...
Page 234 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description SIP Proxy Address An IP or URL address of the SIP proxy server.
Page 235 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Backup SIP outbound proxy An IP or URL address of the backup SIP outbound proxy server. The...
Page 236 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 184. The page for editing SIP line settings. On the opened page, you can specify the following parameters:...
Page 237 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description A username for this line which is used to authorize on SIP proxy Username server.
Page 238 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Session Control Move the switch to the right to enable session control. Upon that you...
Page 239 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description A number dialed by the phone connected to this line after the receiver is lifted.
Page 240: Call On Event
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Call on Event On the VoIP / Profile Name / Call on Event page, you can configure calls on different events.
Page 241 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description Select the needed value from the drop-down list.
Page 242: Advanced
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Advanced On the VoIP / Profile Name / Advanced page you can configure additional profile settings for VoIP over SIP.
Page 243 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Registration Registration expire A time period (in seconds) after which the router changes the timeout registration status in case of no response from the SIP proxy server.
Page 244 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Telephone event relay From the drop-down list, select a mode for DTMF signal transmission.
Page 245 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Jitter Buffer The Jitter Buffer parameter improves the quality of voice transmission: received voice packets are specially delayed, which...
Page 246: Fax Settings
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Fax Settings On the VoIP / Profile Name / Fax Settings page, you can specify settings of data receipt/transfer for the fax machines connected to the SFX ports of the router.
Page 247 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description T.38 Move the switch to the right to allow support of the T.38 protocol. If the switch is moved to the right, the Port field, the Fax/Modem Enable T.38 support...
Page 248 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Passthrough Move the switch to the right to enable the Fax Passthrough Use Fax Passthrough mechanism.
Page 249: Audio Settings
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Audio Settings On the VoIP / Profile Name / Audio Settings page, you can configure audio parameters, volume and voice codecs.
Page 250 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual On the opened page, you can specify the following parameters: Parameter Description Audio Settings Comfort Noise Generation.
Page 251 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the Codecs Settings section, you can configure work of voice codecs in use.
Page 252 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description To enable the codec, move the switch to the right.
Page 253: Call Routing
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Call Routing On the VoIP / Profile Name / Call Routing page, you can configure speed dial parameters and dialplan settings.
Page 254 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the Dialplan Settings section, you can configure the dial plan for VoIP. To do this, move the Use dialplan switch to the right and in the Dialplan field displayed, specify the needed rule.
Page 255 User Manual In the Numbering Plan section, you can configure abbreviated dial, local calls, calls by IP, and combinations of keys on the phone to change some parameters of DVG-5402G/GF directly from the connected phones. Figure 195. The VoIP / Profile Name / Call Routing page. The Numbering Plan section.
Page 256 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Disable Unconditional forwarding Disables forwarding for all calls. Enable Call Forwarding On Busy Enables call forwarding when this line is busy.
Page 257 Action DVG-5402G/GF after the prefix is dialed. Select the required action from the drop-down list. Remove digits from position The first symbol to be removed from the dialed prefix. The number of symbols to be removed from the dialed Remove digits prefix.
Page 258 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description If needed, specify an additional parameter for the selected action, for example, INVITE to send a service...
Page 259: Call Logging
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Call Logging On the VoIP / Profile Name / Call Logging page, you can configure the call log parameters and view information on all calls for your profile.
Page 260: Firewall
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Firewall In this menu you can configure the firewall of the router: add rules for IP filtering •...
Page 261 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 200. The page for adding a rule for IP filtering. You can specify the following parameters:...
Page 262 LAN to Router: The rule will be applied to the packets • transmitted from the local network to DVG-5402G/GF. WAN to Router: The rule will be applied to the packets •...
Page 263 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description The destination host start IPv4 or IPv6 address. If it is necessary to specify a single address, leave the End IPv4 Start IPv4 address / address / End IPv6 address field blank.
Page 264: Virtual Servers
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Virtual Servers On the Firewall / Virtual Servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
Page 265 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 202. The page for adding a virtual server. You can specify the following parameters:...
Page 266 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Interface A WAN connection to which this virtual server will be assigned.
Page 267: Dmz
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks.
Page 268: Mac Filter
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual MAC Filter On the Firewall / MAC Filter page, you can configure MAC-address-based filtering for computers of the router's LAN.
Page 269 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the rule.
Page 270: Url Filter
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual URL Filter On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites and define devices to which the specified restrictions will be applied.
Page 271 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To specify URL addresses to which the selected filtering mode will be applied, in the Addresses section, click the ADD button ( ).
Page 272 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To set a schedule for the URL filter, click the Set schedule button ( ).
Page 273: Adblock
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual AdBlock On the Firewall / AdBlock page, you can enable the function of blocking advertisements which appear during web surfing.
Page 274: System
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual System In this menu you can do the following: change the password used to access the router's settings •...
Page 275: Configuration
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Configuration On the System / Configuration page, you can change the password for the administrator account...
Page 276 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual The following buttons are also available on the page: Control Description Click the button to restore the factory default settings. Also you can...
Page 277: Firmware Update
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Firmware Update On the System / Firmware Update page, you can update the firmware of the router and configure the automatic check for updates of the router's firmware.
Page 278 Ports, and USB Port User Manual By default, in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is specified. To add one more address, click the ADD button and enter the address in the displayed line. To remove the address, click the Delete icon ( ) in the line of the address.
Page 279: Local Update
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Local Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown.
Page 280: Remote Update
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Remote Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown.
Page 281: Schedule
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Schedule On the System / Schedule page, you can enable/disable Wi-Fi connection and configure automatic reboot of the device on a schedule, and set a schedule for different filter rules.
Page 282 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the opened window, in the System Time field, the system time of the device is displayed. You...
Page 283 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To set a schedule for a task which will be applied to a filter rule or will enable/disable Wi-Fi connection, click the ADD button ( ) in the All Tasks section.
Page 284 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Simplified mode Specify the time period for performing a task. Every minute.
Page 285: Log
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual On the System / Log page, you can set the system log options and configure sending the system log to a remote host and/or a USB storage connected to the router.
Page 286 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Logging Select a type of logging from the drop-down list. Local: The system log is stored in the router's memory. When •...
Page 287 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To disable logging of the system events, move the Enable switch to the left and click the APPLY button.
Page 288: Ping
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility.
Page 289 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Figure 216. The System / Ping page. The additional settings window. In the opened window, in the Packet size field, specify the volume of data sent in a request. In the Time to wait for a response field, specify the response waiting period in seconds.
Page 290: Traceroute
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Traceroute On the System / Traceroute page, you can determine the route of data transfer to a host via the traceroute utility.
Page 291 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To specify additional settings, click the MORE SETTINGS button. Figure 218. The System / Traceroute page. The additional settings window.
Page 292: Telnet/Ssh
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Telnet/SSH On the System / Telnet/SSH page, you can enable or disable access to the device settings via TELNET and/or SSH from your LAN.
Page 293: System Time
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual System Time On the System / System Time page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.
Page 294 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual To enable automatic synchronization with a time server, follow the next steps: 1. Move the Enable NTP switch to the right.
Page 295: Auto Provision
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Auto Provision On the System / Auto Provision page, you can enable the Auto Provision function.
Page 296 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Parameter Description Autoconfiguration The IP or URL address of your ISP's server where the configuration server address file is stored.
Page 297: Yandex.dns
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Yandex.DNS This menu is designed to configure the Yandex.DNS service. Yandex.DNS is a web content filtering service which provides the DNS server, protects a computer against malicious web sites, and blocks access to adult web sites.
Page 298 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual When the service is enabled, the Default Mode section is displayed on the page. Select the needed...
Page 299: Devices And Rules
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Devices and Rules On the Yandex.DNS / Devices and Rules page, you can specify a filtering mode for each device separately.
Page 300 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description The MAC address of a device from the router's LAN. You can enter...
Page 301: Skydns
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual SkyDNS This menu is designed to configure the SkyDNS service. SkyDNS is a web content filtering service which provides protection against malicious web sites for devices connected to the router's network, and also allows to configure filtering, block access to adult web sites, and use search engines safely.
Page 302: Settings
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Settings On the SkyDNS / Settings page, you can enable the SkyDNS service and specify settings for its operation.
Page 303 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual The default filtering profile will be applied to all devices newly connected to the router's network.
Page 304: Devices
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual Devices On the SkyDNS / Devices page, you can assign a specific filtering profile to a device connected to the router's network.
Page 305 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Configuring via Web-based Interface Ports, and USB Port User Manual In the opened window, specify the following parameters: Parameter Description The MAC address of a device from the router's LAN to which the specified filtering profile will be applied.
Page 306: Chapter 5. Operation Guidelines
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Operation Guidelines Ports, and USB Port User Manual CHAPTER 5. OPERATION GUIDELINES Safety Rules and Conditions Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged.
Page 307: Wireless Installation Considerations
RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DVG-5402G/GF device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3-90 feet (1-30 meters).
Page 308: Chapter 6. Abbreviations And Acronyms
DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Abbreviations and Acronyms Ports, and USB Port User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Third Generation Access Category Advanced Encryption Standard Access Point Address Resolution Protocol...
Page 309 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Abbreviations and Acronyms Ports, and USB Port User Manual HTTPS Hypertext Transfer Protocol Secure ICMP Internet Control Message Protocol Identifier Internet Gateway Device IGMP...
Page 310 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Abbreviations and Acronyms Ports, and USB Port User Manual OFDM Orthogonal Frequency Division Multiplexing Password Authentication Protocol Push Button Configuration Perfect Forward Secrecy Personal Identification Number...
Page 311 DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS Abbreviations and Acronyms Ports, and USB Port User Manual SSID Service Set Identifier STBC Space-time block coding Transmission Control Protocol TKIP Temporal Key Integrity Protocol...

This manual is also suitable for:

Dvg-5402gf

D-Link DVG-5402G User Manual

Chapter 1. Introduction

Chapter 2. Overview

Chapter 3. Installation and Connection

Chapter 4 Configuring Via Web-Based Interface

Chapter 5. Operation Guidelines

Chapter 6. Abbreviations and Acronyms

Quick Links

Related Manuals for D-Link DVG-5402G

Summary of Contents for D-Link DVG-5402G

This manual is also suitable for:

Table of Contents