Configuring Via Web-Based Interface; Setup Wizard - D-Link AC1200 User Manual

DIR-842V2 AC1200 Wi-Fi Gigabit Router

Configuring via Web-based Interface

User Manual
CHAPTER 4. CONFIGURING VIA WEB-BASED
INTERFACE

Setup Wizard

To start the Setup Wizard, go to the Settings / Setup Wizard section. On the opened page, click
the OK button and wait until the factory default settings are restored.
Figure 31. Restoring the default settings in the Wizard.
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you
are connected to the wireless network of DIR-842V2 (see the WLAN name (SSID) on the
barcode label on the bottom panel of the device) and click the NEXT button.
Figure 32. Checking connection to the wireless network.
Click the START button.
Figure 33. Starting the Wizard.
Page 45