Table of Contents
Advertisement
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
Parameter
Anonymous calling
Enable pound key
Flash time / Flash time
minimum
Extended flash
Attended transfer
Alert transfer
Move the switch to the right to conceal your number from the called
party.
Move the switch to the right to speed up dialing with pressing # (the
pound key) immediately after dialing numbers.
Flash Settings
The maximum and minimum value for flash time (the user hangs up
the receiver and lifts it again) which the router will regard as
pressing the FLASH key.
Move the switch to the right to use combination of the FLASH key
and keys of the phone in order to organize three-party calls or
transfer calls.
By default, each action is assigned to a certain key of the phone set.
To change this value, in the line corresponding to the action, select
the needed value from the drop-down list.
Use of FLASH key
•
The function is enabled. The phone connected to this line has
an incoming call in the standby mode and an outgoing call in
the talk mode. It's needed to press the FLASH key, hear the
dial tone, and then press the key corresponding to your
action.
•
The function is not enabled. The phone connected to this line
has an incoming call in the standby mode and an outgoing
call in the talk mode. It's needed:
◦ to press the FLASH key in order to put the second call
on hold and continue the first call,
◦ to hang up the receiver in order to end both calls and
connect the first and second speakers to each other.
Move the switch to the right if you want to transfer calls when a
called party's receiver is lifted.
Move the switch to the right if you want to transfer calls when a dial
tone is heard.
Page 188 of 244
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
