Table of Contents
Advertisement
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
Print Server
On the Print Server page, you can configure the router as a print server. Being configured in this
way, the router will allow your LAN users to share the printer connected to the USB port of the
router.
To connect a printer to the router, power off both devices. Connect the printer to the USB port of the
router, power on the printer, then power on the router.
To configure the router as a print server, click the ENABLE button. Upon that the Status of
printer field is displayed on the page.
If you don't want to use the router as a print server, click the DISABLE button.
Figure 109. The Print Server page.
Page 137 of 244
Configuring via Web-based Interface
Advertisement
Table of Contents
