Table of Contents
Advertisement
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
Parameter
Fax/Modem
determination
Enable custom
parameters
Maximal buffer
Rate management
Maximal rate
Error correction mode
Enable spoofing
Duplicate number
Enable V.152 support
Payload type
Codec type
When all needed settings are configured, click the APPLY button.
From the drop-down list, select a mode of fax/modem signal
detection.
Move the switch to the right to specify additional parameters for
T.38. Upon that the Custom Parameters T.38 section is
displayed on the page.
Custom Parameters T.38
The maximum buffer size for data received by the router.
From the drop-down list, select a method for facsimile data transfer
rate management: Local or Remote.
From the drop-down list, select the maximum rate for facsimile data
receipt/transfer.
Move the switch to the right to enable the error correction mode.
When the switch is moved to the right, the ECC signal and ECC
data fields are available for editing.
Move the switch to the right to let the router simulate facsimile data
receipt/transfer in case of delays.
Specify number of packet duplications.
V.152
Move the switch to the right to allow support of the V.152
recommendation. Upon that the Payload type field and the
Codec type drop-down list are displayed on the page.
Payload data type.
From the drop-down list, select a codec for data transfer in
accordance with V.152.
Page 196 of 244
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
