D-Link DVG-5402G User Manual page 108

Wireless ac1200 dual band gigabit router with 3g/lte support, 2 fxs ports and usb port
Hide thumbs Also See for DVG-5402G:
Table of Contents

Advertisement

DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
To remove the value of an option, select the checkbox located to the left of the relevant line in the
table and click the DELETE button (
In the Static IP Addresses section, you can specify MAC address and IPv4 address pairs (set a
fixed IPv4 address in the local area network for a device with a certain MAC address). The router
assigns IPv4 addresses in accordance with the specified pairs only when the DHCP server is
enabled (in the Dynamic IP Addresses section, the DHCP server value is selected from the
Mode of dynamic IP address assignment drop-down list).
To create a MAC-IPv4 pair, click the ADD button (
field, enter an IPv4 address which will be assigned to the device from the LAN, then in the MAC
address field, enter the MAC address of this device. You can enter the MAC address of a device
connected to the router's LAN at the moment. To do this, select the relevant device from the drop-
down list (the field will be filled in automatically). In the Hostname field, specify a network name
of the device for easier identification (optional). Click the APPLY button.
In order to view MAC addresses of the devices connected to the router at the moment, click the
KNOWN CLIENTS button. In the opened window, select the needed device and click the OK
button. To view the latest list of the connected devices, click the REFRESH button.
To edit the settings for the existing MAC-IPv4 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the APPLY button.
To remove a MAC-IPv4 pair, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
IPv4 pair in the editing window.
). Then click the APPLY button.
Figure 90. The section for creating MAC-IPv4 pairs.
). Then click the APPLY button. Also you can remove a MAC-
Page 108 of 244
Configuring via Web-based Interface
). In the opened window, in the IP address

Advertisement

Table of Contents
loading

Table of Contents