DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Gigabit Router with 3G/LTE Support and USB Port
User Manual
CHAPTER 4.
INTERFACE
Setup Wizard
To start the Setup Wizard, go to the Settings / Setup Wizard section. On the opened page, click
the OK button and wait until the factory default settings are restored.
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you
are connected to the wireless network of DIR-825 (see the WLAN name (SSID) on the barcode
label on the bottom panel of the device) and click the NEXT button.
Click the START button.
CONFIGURING
Figure 31. Restoring the default settings in the Wizard.
Figure 32. Checking connection to the wireless network.
Figure 33. Starting the Wizard.
Page 48 of 244
Configuring via Web-based Interface
VIA
WEB-BASED