D-Link DVG-5402G User Manual page 147

DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual
Parameter
Enable download queue
Download queue size
Peer limit
Use uTP
Web interface port
Enable
Username
Password
After specifying the needed parameters, click the SAVE button.
In the Web-interface page field, the address of the web-based interface of the Transmission
client is displayed. To access the web-based interface of the Transmission client, click the link.
Move the switch to the right if you want to limit the number of
simultaneous downloads. Upon that the Download queue size
field will be displayed.
Move the switch to the left not to limit the number of simultaneous
downloads.
The maximum number of simultaneous downloads. By default, the
value 1 is specified.
The maximum number of the service users from which you can
download files.
Move the switch to the right to enable μTP (Micro Transport
Protocol, a transport protocol for file sharing). Such a setting can
increase the load on the router.
Move the switch to the left to disable μTP.
The port on which the web-based interface of the Transmission
client is available.
Authorization
Move the switch to the right if you want the Transmission client to
request for username and password when accessing its web-based
interface. Then fill in the Username and Password fields.
The username to access the web-based interface of the Transmission
client.
The password to access the web-based interface of the Transmission
client.
Page 147 of 244
Configuring via Web-based Interface
Description