Chapter 4. Configuring Via Web-Based Interface; Initial Configuration Wizard - D-Link DSL-G2452GR User Manual

DSL-G2452GR MU-MIMO Wireless Dual Band VDSL2 Router with
ASDL2+/3G/LTE/Gigabit Ethernet WAN Support, 2 FXS Ports and USB Port
User Manual
CHAPTER 4.
INTERFACE

Initial Configuration Wizard

To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened
page, click the OK button and wait until the factory default settings are restored.
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you
are connected to the wireless network of DSL-G2452GR and click the NEXT button.
Click the START button.
CONFIGURING
Figure 19. Restoring the default settings in the Wizard.
Figure 20. Checking connection to the wireless network.
Figure 21. Starting the Wizard.
Page 39 of 262
Configuring via Web-based Interface
VIA WEB-BASED