Mac Filter - D-Link DVG-5402G User Manual

Wireless ac1200 dual band gigabit router with 3g/lte support, 2 fxs ports and usb port
Hide thumbs Also See for DVG-5402G:
Table of Contents

Advertisement

DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support,
2 FXS Ports and USB Port
User Manual

MAC Filter

On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be
allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to
access the WLAN.
!
It is recommended to configure the Wi-Fi MAC filter through a wired connection to DVG-
5402G .
Figure 107. The page for configuring the MAC filter for the wireless network.
By default, the Wi-Fi MAC filter is disabled.
To configure the MAC filter, first you need to create rules (specify MAC addresses of devices for
which the specified filtering modes will be applied). To do this, click the ADD button (
Figure 108. The window for adding a rule for the MAC filter.
Page 135 of 244
Configuring via Web-based Interface
).

Advertisement

Table of Contents
loading

Table of Contents