Advertisement
Read all safety and warning guidelines before operating the projector laser.
Warning! If not avoided, the following could result in death or serious injury.
•
Do not operate the cinema projector without all of its covers in place.
•
LASER RADIATION HAZARD! This projector has a built-in Class 4 laser module. Never attempt to
disassemble or modify the laser module.
•
Do not look directly into the lens when the light source is on. The extremely high brightness can
cause permanent eye damage.
•
Possible hazardous optical radiation emitted from this product. (Risk group 3)
This projector has been classified as Risk Group 3 as per the IEC62471 standard due to possible hazardous
optical and thermal radiation being emitted.
Warning! If not avoided, the following could result in death or serious injury.
•
PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be
permitted.
•
PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam within
the hazard distance or install the product at the height that prevents exposure of spectators' eyes
within the hazard distance. The hazard zone must be no lower than 2.5 meters (US installations)
or 2.0 meters (global installations) above any surface upon which any persons are permitted to
stand and the horizontal clearance to the hazard zone must be a minimum 1.0 meters.
•
EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.
The following diagram and table show the zones for ocular and skin hazard distances:
•
A—Hazard zone. The region of space where the projection light from the projector is above emission
limits for Risk Group 2. The light intensity may cause eye damage after a momentary or brief
exposure (before a person can avert his or her eyes away from the light source). The light may cause
skin burns to occur.
•
B—Hazard distance. Operators must control access to the beam within the hazard distance or install
the product preventing potential exposure of the spectators' eyes from being in the hazard distance.
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe Installation and Setup Guide
020-103451-02 Rev. 1 (05-2021)
Copyright
2021 Christie Digital Systems USA, Inc. All rights reserved.
©
Safety precautions
7
Advertisement
