Advertisement
8. If you are using an Uninterrupted Power Supply (UPS) to power the main electronics, move the AC
switch to A + B and connect the power cord provided with the UPS to the B outlet.
AC switch
A
100-240 V secondary inlet
B
Turn the projector on to display content, or turn the projector off to conserve energy.
1. In the right toolbar, tap and hold Power.
Log on to the projector to access projector menus.
1. Select Login.
2. In the User list, select a user name.
3. Enter your password.
4. Select Login.
You must complete marriage to display content and to comply with the Digital Cinema Initiatives (DCI)
specification.
You cannot complete marriage remotely.
1. In the left navigation menu, tap Service Setup > Marriage Setup.
2. Tap Start and complete the Marriage Setup wizard.
3. Tap Finish.
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe Installation and Setup Guide
020-103451-02 Rev. 1 (05-2021)
Copyright
2021 Christie Digital Systems USA, Inc. All rights reserved.
©
200-240 V main inlet
C
Installation and setup
23
Advertisement
