Advertisement
Learn how to adjust image geometry so it displays correctly.
Activate the Intelligent Lens System (ILS) to automatically adjust the position of the lens.
1. In the left navigation menu, tap Service Setup > Preferences.
2. Tap Lens/ILS.
3. In the right pane, tap the ILS Installed slider.
4. The color of the slider changes to green to indicate the ILS is active.
Use the Auto Calibrate feature of the Intelligent Lens System (ILS) to find and compensate for motor
backlash, and to determine the movement range for the currently installed lens.
1. In the left navigation menu, tap Image Settings > ILS File Setup.
2. Tap Create.
3. Type a name for the ILS file and tap Create.
4. Tap Auto Calibrate.
5. Tap Continue.
An image that is brighter at the center than it is at the sides needs vignetting correction.
If your image suffers from vignetting, the lens has reached the end of its offset travel range. If your
installation does not allow the image to be centered with the center of the screen, move the entire projector in
the direction of lens travel.
Learn how to adjust the image to correct keystone effect.
Keystone effect occurs when you project an image onto the screen at an angle. As a result, the image appears
distorted and resembles a trapezoid.
If the image suffers from slight keystone effect, it can be corrected with electronic cropping.
If the keystone effect is severe, you can unevenly adjust the feet to compensate for projector tilt. Christie
recommends using the lens offset to align the center of the image to the center of the screen before you
correct the keystone effect.
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe Installation and Setup Guide
020-103451-02 Rev. 1 (05-2021)
Copyright
2021 Christie Digital Systems USA, Inc. All rights reserved.
©
27
Advertisement
