The touch panel controls projector functions and provides quick access to projector information. The touch
panel can be mounted on the rear panel or the electronics side of the projector.
1. Remove the touch panel and the mounting arm from their packaging.
2. Attach one end of the touch panel mounting arm over the ball joint on the rear of the touch panel.
Mounting arm
A
Ball joint
B
3. While supporting the touch panel, fit the other end of the touch panel mounting arm over the ball joint
on the rear panel or electronics side of the projector.
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe Installation and Setup Guide
020-103451-02 Rev. 1 (05-2021)
Copyright
2021 Christie Digital Systems USA, Inc. All rights reserved.
©
Installation and setup
19