Advertisement
Lock
B
2. Extend or retract the feet.
3. When the adjustment is correct, tighten the lock nut.
To stack CP2306-RGBe, CP2308-RGBe, CP2310-RGBe projectors, use the stacking kit provided. The stacking
kit includes these parts:
Locking bracket (quantity 4)
When stacking projectors, the optical axis of the projectors must be parallel to one another. The maximum tilt
for stacked projectors is 13 degrees. When you install the stacked projectors in a rack stand or on a pedestal,
the rack stand or the pedestal must remain horizontal. If you require tilt to align your images, you must tilt
the projectors and not the rack stand or pedestal.
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe Installation and Setup Guide
020-103451-02 Rev. 1 (05-2021)
Copyright
2021 Christie Digital Systems USA, Inc. All rights reserved.
©
Stacking cup (quantity 4)
Installation and setup
M6 screw (quantity 4)
16
Advertisement
