Modifiers; Auto Dry Cycle Modifiers; Air Dry; When Using Air Dry - Kenmore Oasis 110.67032600 Manual

MODIFIERS

AUTO DRY CYCLE MODIFIERS

Use the Dryness Level Modifier to select dry-
ness levels for the Auto Dry Cycles. Press
Dryness Level until the desired Dryness Level
setting illuminates.
The preset dryness setting is Normal when an
Automatic Cycle is selected. You can select a
different dryness level, depending on the load,
by pressing Dryness Level and choosing More,
Normal or Less. Selecting More, Normal or
Less automatically adjusts the dryness level at
which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stop-
ping the cycle.
NOTE: Dryness Level selections cannot be
used with the Timed Cycles.
TIMED CYCLE MODIFIERS
Use the Temperature Modifier to select tem-
peratures for the Timed Cycles. Press Tem-
perature until the desired temperature setting
illuminates.
NOTE: Temperature modifiers cannot be used
with the Auto Dry Cycles.

AIR DRY

Use the Air Dry Modifier for items that require
drying without heat such as rubber, plastic
and heat-sensitive fabrics. This table shows
examples of items that can be dried using Air
Dry.
Type of Load
Foam rubber - pillows, padded bras, stuffed toys
Plastic - Shower curtains, tablecloths
Rubber-backed rugs
Olefin, polypropylene, sheer nylon
* Reset cycle to complete drying, if needed.

When using Air Dry

• Check that coverings are securely
stitched.
• Shake and fluff pillows by hand periodically
during the cycle.
• Dry item completely. Foam rubber pillows
are slow to dry.
NOTE: Air Dry is not available with Auto Dry
Cycles.
OPTIONS
You can customize your cycles by selecting
options.
DRUM LIGHT
Select Drum Light to turn on the light inside
the dryer drum. During a cycle, if Drum Light
is selected, the drum light turns on and will re-
main on until DRUM LIGHT is pressed again,
the door is open and closed, or the door is left
open for five minutes.
3-6
Time*
(Minutes)
20 - 30
20 - 30
40 - 50
10 - 20