Kenmore ELITE Oasis 110.6808 Series Quick Start Manual

Oasis
We have taken great care to give your new dryer the most convenient and easy-to-use features. Use this guide to help optimize the use of your dryer. This
information covers several different models. Your dryer may vary from the model shown and may not have all the cycles and features described. Consult the
Use and Care Guide for more detailed instructions. To contact Sears Service, call 1-800-4-MY-HOME ®(1-800-469-4663).
f MODIFIERS
More I_gh
Dryness Temperature
OPTIONS
Drum L_ght
Damp Dry Signal
Wtir, kk Guard 150
[0d
soft
Cycle Signal Volume
Models/Modelos 110.68085, 68095, 78085, 78095-
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in
death, explosion, or fire.
1. Clean the lint screen.
2. Place laundry in dryer.
3. Shut the door.
4. Press POWER.
5. Select Auto Dry Cycle,
* Turn cycle knob to recommended Auto Dry Cycle for type
of Ioadbeing dried.
* If desired, adjust the Dryness Level.
* Temperatures cannot be adjusted on Auto Dry Cycles.
or select Timed Cycle.
* Turn cycle knob to Timed Dry.
* Select drying time using More Time or Less Time buttons.
Select temperature setting using Temperature button.
6. Select OPTIONS.
* To be alerted when cycle is complete, select the
Cycle Signal.
* During Auto Dry Cycles, to be alerted when clothes are
still damp, select the Damp Dry Signal.
* To help keep wrinkles from forming after drying is
complete, select Wrinkle Guard ® .
7. Press and hold the START button.
...,/
W10164637A
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
items containing foam, rubber, or plastic must be
dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in
death or fire.
This feature is a reminder to check whether the lint
screen needs to be cleaned. The Check Lint Screen light
will come on when the machine is turned on. The light will
flash until the cycle is started or the door is opened.
£S'l'l TIII£ l£1IIllllI
A preset time is displayed when an Auto Dry Cycle is
selected. During the first few minutes of the drying
process, the cycle time may automatically vary from the
preset time based on the size and fabric type of the load.
Toward the end of the drying process, the estimated time
display will adjust again, showing the final drying time. For
Timed Cycles, this time will count down from the start of the
cycle.
,._ j
Continued on back