Removing The Moisture Sensor - Kenmore Oasis 110.67032600 Manual

REMOVING THE MOISTURE SENSOR

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dryer or disconnect power.
2. Turn off gas supply to dryer.
3. Open the dryer door and remove the lint
filter screen.
4. Remove the cabinet front (see page 4-6
for the procedure).
Moisture Sensor
Lint Filter Screen
5. Disconnect the moisture sensor connec-
tor from the harness connector.
Moisture Sensor
Connector
6. From inside the dryer, remove the two
screws from the outlet grille.
Moisture Sensor Strips
7. Pull the outlet grille and moisture sensor
away from the dryer and disconnect the
black and yellow-red wires from the sen-
sor strips.
Moisture Sensor
Wires
4-5
Outlet Grille
Screws