Plan Vent System; Recommended Exhaust Installations; Optional Exhaust Installations - Kenmore Oasis 110.67032600 Manual

PLAN VENT SYSTEM

Recommended exhaust installations

Typical installations vent the dryer from the
rear of the dryer. Other installations are pos-
sible.
A
A. Dryer E. Clamps
B. Elbow F. Rigid metal or flexible metal vent
C. Wall G. Vent length necessary to connect
D. Exhaust hood
H. Exhaust outlet

Optional exhaust installations

Venting systems come in many varieties. Se-
lect the type best for your installation.
Fire Hazard
Cover unused exhaust hole with the
following kit:
8212503
Contact your local dealer.
Failure to follow these instructions
can result in death, fire, electrical
shock, or serious injury.
B
C
D
E
F
G
B
H
elbows
This dryer can be converted to exhaust out the
bottom. If you prefer, you may contact your lo-
cal dealer to have the dryer converted. This
dryer can also be exhausted from the rear to
either the right or left side. Optional kits for
these exhaust installations are needed. Re-
fer to the manufacturer's instructions for kit
installation instructions.
A
A. Standard rear offset exhaust installation
B. Rear exhaust installation to left or right side
C. Bottom exhaust installation
D. Over-the-top installation (also available
with one offset elbow)
NOTE: The following kits for alternate instal-
lations are available for purchase. For further
information, please call 1-800-4-MY-HOME
(1-800-469-4663).
• Rear exhaust installation to left or right side:
Part Number 8212504
• Bottom exhaust installation:
Part Number 8212503
• Over-the-Top installation:
Part Number 26-49900
2-18
B
C
D
®