Changing Cycles, Options And Modifiers - Kenmore 110.8770 Series Use & Care Manual

UltraDelicate
Use thiscycle togetextra-low h eat t ogently d ryitems such as
lingerie, blouses orwashable knitfabrics.
AutoDryPreset C ycle Settings
Auto Cycles Temperature Time*
Load Type (Minutes)
NORMAL Medium 40
Corduroys, work clothes,
sheets
BULKY/BEDDING Medium 60
Jackets, comforters,
pillows
JEANS Medium High 55
Denim jeans, jackets
HEAVY DUTY High 45
Heavyweight mixed loads,
cotton towels, bedspreads
CASUAL Low 35
Permanent press,
synthetics
ULTRA DELICATE Extra Low 30
Lingerie, blouses, washable
knit fabrics
*Estimated Time with Auto Dry Level (Normal) setting. Time will
vary dependings on load type and load size.
SteamCare Cycles
Use SteamCare Cycles to help smooth out wrinkles from dry
items, such as clothes that have been worn or clothes that have
been left in the dryer too long. When the SteamCare Cycle is
selected, the estimated time remaining display shows the actual
time remaining in the cycle.
NOTE: Results may vary depending on fabric. 100% cotton
garments with wrinkle-free finsih may yield better results than
those without.
Refresh with SteamCam
This cycle is best for smoothing out wrinkles and reducing odors
from loads consisting of one to four dry items of wrinkle-free
cotton, cotton-polyester blend, common knits and synthetic
garments. In this cycle a small amount of water is sprayed into
the dryer drum after several minutes of tumbling with heat. The
dryer will continue to tumble with heat followed by a brief cool
down. The heat level and cycle time are not adjustable.
Touch Up with SteamCare
This cycle is best for touching up clothes that have been left in
the dryer too long. In this cycle, a small amount of water is
sprayed into the dryer drum after several minutes of tumbling
with heat. The dryer will continue to tumble with heat followed by
a brief cool down. The dry time and temperature can be adjusted
for this cycle.
NOTE: Overloading the dryer may not yield the same results.
SteamCare Preset Cycle Settings
Timed Cycles Default Default Time
Load Type Temperature* (Minutes)*
REFRESH Medium High 15
Helps to smooth out
wrinkles and reduce odors
from loads consisting of
one to four dry items.
TOUCH UP Medium High 20
Helps to smooth out
wrinkles in loads left in the
dryer for an extended
period.
*Temperature and time are selectable only for the Touch Up
Cycle.
NOTE: The Touch Up cycle has a minimum dry time of
15 minutes and a maximum dry time of 40 minutes. Only the
Medium, Medium High, and High temperature settings can
be used for the Touch Up cycle.
Timed Cycles
Use Timed Cycles to select a specific amount of drying time and
a drying temperature. When a Timed Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing More Time or Less Time. See "Changing
Cycles, Options and Modifiers."
Timed Dry
Use this cycle to complete drying if items are still damp after an
Auto Cycle. Timed Dry is also useful for drying heavyweight and
bulky items, such as bedspreads and work clothes. Lightweight
garments, such as exercise wear, can be dried using Timed Dry
on a low temperature setting.
Use Timed Dry/Air Dry cycles for items that require drying without
heat such as rubber, plastic and heat-sensitive fabrics. This table
shows examples of items that can be dried using Timed Dry/Air
Dry cycles.
Type of Load Default Time*
Temperature (Minutes)
Foam rubber - pillows, Air Dry 20 - 30
padded bras, stuffed toys
Plastic - Shower curtains, Air Dry 20 - 30
tablecloths
Rubber-backed rugs Air Dry 40 - 50
Olefin, polypropylene, Air Dry 10 - 20
sheer nylon
*Reset cycle to complete drying, if needed.
When using Timed Dry/Air Dry
• Check that coverings are securely stitched.
• Shake and fluff pillows by hand periodically during the cycle.
• Dry item completely. Foam rubber pillows are slow to dry.
EXPRESS DRY
TM
Use this cycle for drying small loads or loads that need a short
drying time.
23