Modifiers; Options - Kenmore Elite Oasis 110.C6706 Series Use & Care Manual

Modifiers

Auto Dry Cycle Modifiers
Use the Dryness Level Modifier to select dryness levels for the
Auto Dry Cycles. Press Dryness Level until the desired Dryness
Level setting illuminates.
The preset dryness setting is Normal when an Automatic Cycle is
selected. You can select a different dryness level, depending on
your load, by pressing Dryness Level and choosing More, Normal
or Less. Selecting More, Normal or Less automatically adjusts
the dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
NOTE: Dryness Level selections cannot be used with the Timed
Cycles.
Timed Cycle Modifiers
Use the Temperature Modifier to select temperatures for the
Timed Cycles. Press Temperature until the desired temperature
setting illuminates.
NOTE: Temperature modifiers cannot be used with the Auto Dry
Cycles.
Air Dry
Use the Air Dry Modifier for items that require drying without heat
such as rubber, plastic and heat-sensitive fabrics. This table
shows examples of items that can be dried using Air Dry.
Type of Load
Foam rubber - pillows, padded bras, stuffed toys
Plastic - Shower curtains, tablecloths
Rubber-backed rugs
Olefin, polypropylene, sheer nylon
*Reset cycle to complete drying, if needed.
16
When using Air Dry
■ Check that coverings are securely stitched.
■
Shake and fluff pillows by hand periodically during the cycle.
■ Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Air Dry is not available with Auto Dry Cycles.
You can customize your cycles by selecting options.
Drum Light
On some models, you may select Drum Light to turn on the light
inside the dryer drum. During a cycle, if Drum Light is selected,
the drum light turns on and will remain on until DRUM LIGHT is
pressed again, the door is open and closed, or the door is left
open for 5 minutes.
When the dryer is not running, the drum light will turn on when
DRUM LIGHT is pressed or the dryer door is opened, and it will
remain on until the dryer door has been open for 5 minutes, the
dryer door is closed or DRUM LIGHT is pressed again.
Press DRUM LIGHT at any time to turn the drum light ON or OFF.
Damp Dry Signal
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry or suitable for ironing. This is useful when
you want to remove lightweight items in a mixed load to avoid
overdrying or remove partially dry items that may need ironing.
The DAMP DRY SIGNAL is useful when drying bedsheets/linens
in a mixed load. When the signal goes off, open the door to stop
the dryer, rearrange the load inside the dryer, close the door and
restart the dryer to finish the drying cycle. Rearranging the load
will aid in the drying process.
NOTE: The Damp Dry Signal is available only with the Auto Dry
Cycles.
WRINKLE GUARD
WRINKLE GUARD
when clothes are not removed promptly at the end of a cycle.
During this option, the dryer stops tumbling and then tumbles
again for a brief period without heat when pressed.
■ Press WRINKLE GUARD
Time*
at the end of a cycle. WRINKLE GUARD
(Minutes)
and stops the dryer, tumbling the load without heat for 30, 60,
90 or 150 minutes (depending on your model) unless you
20 - 30
open the dryer door.
■ Stop WRINKLE GUARD
20 - 30
GUARD
40 - 50
■ For the Casual Cycle, WRINKLE GUARD
The other Auto Dry Cycles will retain the WRINKLE GUARD
10 - 20
setting. For example, if you select WRINKLE GUARD
Normal cycle, WRINKLE GUARD
select the Normal cycle.
NOTE: If you do not select WRINKLE GUARD
after cool down.

Options

®
(30, 60, 90, 150 minutes)
® helps smooth out wrinkles that may form
® to get heat-free, periodic tumbling
® at any time by pressing WRINKLE
®
, opening the dryer door or pressing STOP.
® will be on the next time you
®
periodically starts
® is preset to ON.
®
® in the
® , the dryer stops