Hyundai 250D-9 Manual page 90

8) ACCELERATOR PEDAL
160D7ECD32
9) INCHING PEDAL
160D7ECD34
10) STEERING WHEEL LEVER
110D9CD70
11) ENGINE HOOD
Pull
50D7ACD25
(1) This pedal controls the engine speed. The engine speed will
increase in proportion to the degree of force applied to this pedal.
(2) Unless this pedal is pressed, the truck will run at low idling.
(1) Inching pedal is used for fine control of forward and reverse
movement when lifting up or putting down loads.
Do not put your foot on the inching pedal or brake pedal unless
using it.
(1) By pulling down the lever, the wheel is adjustable to tilt.
(2) By pulling up the lever, the wheel is adjustable to
telescope.
(3) Adjustable steering wheel
Accommodates various operator's conditions.
- Tilting abgle : 40˚
- Telescopic stroke : 80 mm
(1) Pull the handle attached on the bolt side of engine hood to open it.
3-40