Hyundai 250D-9 Manual page 185

22) 22) R E P L A C E M E N T O F E L E M E N T I N R E P L A C E M E N T O F E L E M E N T I N
HYDRAULIC TANK BREATHER HYDRAULIC TANK BREATHER
(1)
Loosen the cap and relieve the pressure in the
tank.
(2)
Loosen the screw and remove the cover.
(3)
Pull out the filter.
(4)
Replace the filter with new one.
(5)
Reassemble by reverse order of disassembly.
·Tightening torque of the bolts :
2.7~4.1 kgf·m (19.5~29.7 lbf·ft)
23) 23) REPLACE THE ELEMENT OF THE BRAKE REPLACE THE ELEMENT OF THE BRAKE
LINE FILTER LINE FILTER
(1)
Remove the filter case from the filter assy.
(2)
Pull out the filter element and clean filter case.
(3)
Replace filter element and O-ring with new parts.
(4)
Reassemble line filter.
24) 24) LUBRICATE RCV LEVER LUBRICATE RCV LEVER
Remove bellows and grease the joint (A) and the
sliding parts (B).
Line filter
Bellows
7-37
Air breather
Air breather
Element
Bolt
250D9MA18
OUT
IN
Rear-frame
250D9MA23
A
160D7MI25
B