Hyundai 250D-9 Manual page 123

5) 5) TRANSMISSION COLD STARTING TRANSMISSION COLD STARTING
(1) At an oil temperature in the shifting circuit
< -12˚C, the transmission must be warmed-up
for some minutes.
(2) This must be carried out in neutral with an
increased engine speed.
(3) Until this oil temperature is reached, the
electronics remains in neutral, and the symbol of
the cold start phase will be indicated on the
display.
·Indication on the display :
(4) A f t e r t h e i n d i c a t i o n o n t h e d i s p l a y i s
extinguished, the full driving program can be
utilized out of NEUTRAL.
6) 6) TO STOP THE ENGINE TO STOP THE ENGINE
※
If the engine is abruptly stopped before it If the engine is abruptly stopped before it
has cooled down, engine life may be greatly has cooled down, engine life may be greatly
shortened. Consequently, do not abruptly shortened. Consequently, do not abruptly
stop the engine apart from an emergency. stop the engine apart from an emergency.
※
In particularly if the engine has overheated, In particularly if the engine has overheated,
do not abruptly stop it but run it at medium do not abruptly stop it but run it at medium
speed to allow it to cool gradually, then stop speed to allow it to cool gradually, then stop
it. it.
(1) Place the gear selector lever in neutral.
(2)
Turn the parking brake switch ON.
(3) Run the engine for five minutes at low idle with
no load.
(4)
Return the key of starting switch to the OFF
position.
(5) Remove the key to prevent other people using
the trucK.
(6) Lock the cab door.
 

5-15
50D9ECD17
Low idling for
5 minutes
250D9OP07