Hyundai 250D-9 Manual page 12

8) 8) SAFETY INSTRUCTION (Item 30) SAFETY INSTRUCTION
This warning label is positioned on the left
window of cabin inside if the truck is for
USA or equipped with *OPSS.
This forklift is equipped with an operator This forklift is equipped with an operator
existence sensing system per ISO 3691. existence sensing system per ISO 3691.
(1) Power travel movement of the truck shall
be possible only if the operator is in the
normal operating position. Transmission
will automatically shift to neutral upon the
exiting of the operator.
(2)
The gear selector lever must be cycled
through neutral with the operator in the
normal operating position to regain
powered direction control.
(3)
Control of mast tilting, lifting and lowering
is not possible through operation of the
appropriate control when the operator is
not in the normal position.
※
Please review this manual for safe Please review this manual for safe
operation of forklift. operation of forklift.
9) 9) TCU CONNECTOR TCU CONNECTOR (Item 25)
This warning label is located on the right
side frame.
※
Please separate the connector from Please separate the connector from
TCU, MCU and ECM before weldng. TCU, MCU and ECM before weldng.
10) 10) WHEEL NUTS WHEEL NUTS (Item 37)
This warning label is positioned on the both
top side of front fender.
Always completely deflate the tire first Always completely deflate the tire first
before attempting to loosen out the before attempting to loosen out the
wheel nuts. wheel nuts.
OPSS.
0-9
Truck for USA or equipped with *OPSS.
SAFETY INSTRUCTIONS
This forklift equipped with an operator existence sensingsing
system per ISO 3691
Power travel movement of the truck shall be possible only if the
operator is in the normal operating position. Transmission will
automatically shift to neutral upon the exiting of the operator.
The Forward/Reverse lever must be cycled through neutral with
the operator in the normal operating position to regain powered
directional control.
Control of mast tilting, lifting and lowering is not possible through
operation of the appropriate control when the operator is not
in the normal position.
Please review Operator's manual for safe operation of forklift.
*OPSS : Operator Presence Sensing System
Always completely deflate the tire first before attempting Always completely deflate the tire first before attempting
to loosen out the wheel nuts. to loosen out the wheel nuts.
92FT-00241
92FT-00241
92HV-40281
92HV-40810
92HV-40810