Operator's Safety Rules - Hyundai 250D-9 Manual

16. OPERATOR'S SAFETY RULES

16. OPERATOR'S SAFETY RULES
1) All operational functions require that the
operator be seated in the operator's seat.
Always buckle up if a seat belt is Always buckle up if a seat belt is
provided. provided.
2) Parking brake must be locked in the PARK
POSITION before exiting from the vehicle.
Parking brake must remain locked in the Parking brake must remain locked in the
park position (ON) except when an park position (ON) except when an
operator is in the normal operating operator is in the normal operating
position. position.
3) 3) ISO 3691 ISO 3691 REGULATIONS ( REGULATIONS (TRUCK FOR USA OR EQUIPPED WITH A *OPSS)
This forklift truck is equipped with an Operator Existence Sensing System per ISO 3691. This forklift truck is equipped with an Operator Existence Sensing System per ISO 3691.
*OPSS : Operator Presence Sensing System
(1) (1) Traction safety warning Traction safety warning
①
This function works when the key switch is ON or START position.
②
The transmission (power automatically cutoff) in 2 seconds from the driver's off the seat.
③
At the same time, the warning lamp ON and alarm will sound intermittently if the gear selector
lever was not returned to neutral.
④
To release the function, the gear selector lever must be cycled through neutral with the operator
in the normal operating position to regain powered directional control.
(2) (2)
Parking brake warning Parking brake warning
①
This function works when the key switch is not only ON or START position but also OFF
position.
②
Alarm sounds in 2 seconds from the driver's off the seat with the parking brake released.
③
To release the function, the parking brake switch must be turned to ON (PARK) position.
④
When the key switch is OFF position, alarm will sound only for 30 seconds .
1 OFF(DRIVE)
2 ON(PARK)
1-18
250D9OM18
50D9OM24H