Hyundai 250D-9 Manual page 190

(6) Remove the transmission oil filter cartridge.
Dispose of the used transmission oil filter
cartridge properly.
(7) Clean the filter cartridge mounting base.
Remove any part of the filter cartridge gasket
that remains on the filter cartridge mounting
base.
(8) Apply a light coat of oil to the gasket of a new
transmission oil filter cartridge.
(9) Install the new transmission oil filter cartridge.
Screw the filter in until contacts with the sealing
surface is obtained and tighten it now by hand
about 1/3 to 1/2 turn.
(10) Mount the drain plug of transmission after
cleaning it.
(11) Fill the oil through level gauge inlet and check if
the oil is at the appropriate level.
(12) The proper oil amount is 27 liters (7.1 U.S. gallons)
As the truck is hot after operation wait until As the truck is hot after operation wait until
the temperature has dropped. the temperature has dropped.
It is imperative to pay attention to absolute It is imperative to pay attention to absolute
cleanliness of oil and filter. cleanliness of oil and filter.
Binding is in any case the marking on the oil Binding is in any case the marking on the oil
level gauge. level gauge.
Transmission oil filter
Level
gauge
7-42
250D7MI43
73036MI14
HOT COLD
ZONE " HOT"
250D9MA41