Hyundai 250D-9 Manual page 187

Do not use recycled wheel parts. Do not use recycled wheel parts.
When removing lockering or inflating tire, use When removing lockering or inflating tire, use
safety cable or chain to ensure safety. safety cable or chain to ensure safety.
B e s u r e t o b l e e d a i r b e f o r e r e m o v i n g B e s u r e t o b l e e d a i r b e f o r e r e m o v i n g
lockering. Never inflate tires unless the lockering. Never inflate tires unless the
lockering is assembled in its place. lockering is assembled in its place.
※
Avoid the followings when traveling. Avoid the followings when traveling.
①
Rubbing tires against road bank or rack at
cargo-unloading spot.
②
Tires slippage during working.
③
Abrupt starting of the truck.
④
When oil, grease or gasoline smeared on tire,
clean those. Otherwise it may cause of
permanent deformation.
26) 26) REPLACEMENT OF TIRE REPLACEMENT OF TIRE
Disassembly, reassembly, replacement and Disassembly, reassembly, replacement and
repair of tire requires special skills and repair of tire requires special skills and
equipment. Contact a tire repair shop. equipment. Contact a tire repair shop.
(1) (1)
Tires to be replaced Tires to be replaced
①
Tires with broken or bent bead wires
②
Tires exposed more than 1/4 of carcass fly.
③
Tires whose carcass is damaged more than 1/3
of the tire width.
④
Tires which show fly separation.
⑤
Tires which has a radial crack near the
carcass.
⑥
Tires which are judged to be unsuitable for use
because of deformation or damage.
(2) (2) Separation of tire Separation of tire
①
After moving the truck to flat ground, lower the
fork to the ground and turn the parking brake
switch ON.
Side wall
Bead
7-39
Tread
Carcass
Valve
160D7MI35
OFF
ON
250D9MI36A