Check Before Starting Engine - Hyundai 250D-9 Manual

3. CHECK BEFORE STARTING ENGINE

3. CHECK BEFORE STARTING ENGINE
1) 1) CHECK FOR WATER OR OIL LEAKAGE CHECK FOR WATER OR OIL LEAKAGE
(1) Walk around your HYUNDAI truck and check for water, oil or hydraulic leakage. Examine truck
for obvious damage.
(2)
Check cabin, backrest and forks for crack or obvious damage.
(3) If any damage or leaks are detected contact your HYUNDAI dealer or tire repair shop.
2) 2) CHECK TIRE AIR PRESSURE/CHECK TIRE RIM CHECK TIRE AIR PRESSURE/CHECK TIRE RIM
 Air pressure and torque
Air pressure and torque
Item
Tire air
pressure
Hub nut
tightening
torque
The tires are under high inflation pressure, so failure to follow the correct procedures when The tires are under high inflation pressure, so failure to follow the correct procedures when
changing or servicing tires and rims could cause the tire to explode, causing serious injury or changing or servicing tires and rims could cause the tire to explode, causing serious injury or
damage. The tires and rims should always be serviced or changed by trained personnel damage. The tires and rims should always be serviced or changed by trained personnel
using the correct tools and procedures. For details of procedures, contact your HYUNDAI using the correct tools and procedures. For details of procedures, contact your HYUNDAI
dealer or tire repair shop. dealer or tire repair shop.
If there is any deformation, damage, or wear of the rim, or any doubt about the condition, If there is any deformation, damage, or wear of the rim, or any doubt about the condition,
always replace the rim. Never try repairing, welding, or heating. always replace the rim. Never try repairing, welding, or heating.
Unit Front tire
kgf/cm 2
psi
bar
kgf·m
lbf·ft
N.m
5-3
10.2
142
10.0
35±2
253±14
343±19
Rear tire
10.2
142
10.0
62.5±2.5
452±18
613±24.5