Hyundai 250D-9 Manual page 81

1) START SWITCH
77073CD41
2) HAZARD SWITCH (OPTION)
OFF
ON
35D9AOM17
3) INCHING SWITCH
50D9CD43
4) PARKING BRAKE SWITCH
50D9CD44
5) MAIN LIGHT SWITCH
50D9CD45
(1) There are three positions, OFF, ON and START.
(OFF) : None of electrical circuits activate.
(ON) : All the systems of truck operate.
(START) : Use when starting the engine.
Release key immediately after starting.
(1) Use for parking, or loading truck.
If the switch is left ON for a long time, the battery may be
discharged.
(1) If this switch is pressed, inching operation is applied to inching
pedal.
(2) Also, inching lamp on the cluster is illuminated.
(1) This switch is used to parking brake lock or release.
(2) If this switch is pressed, the parking brake is applied and the
warning lamp on the cluster will comes ON.
When operating the gear selector lever, be sure to release the
parking brake. If the truck is operated with the parking brake
engaged, the brake will overheat and may cause the brake
system to go out of order.
(1) This switch is used to operate the head light by one steps.
First step : Clearance lamp and cluster illumination lamp comes
ON. Also, all of the pilot lamps of switches come ON.
Second step : Head lamp comes ON.
3-31