Hyundai 250D-9 Manual page 106

2) 2) FUNCTIONAL CHECKS FUNCTIONAL CHECKS
Check the operation of the truck as follows.
※
Before performing these checks, familiarize yourself with the starting, operating, and Before performing these checks, familiarize yourself with the starting, operating, and
shutdown procedures in Section 5 of this manual. Also, know the safety rules given in shutdown procedures in Section 5 of this manual. Also, know the safety rules given in
Section 1 of this manual. Section 1 of this manual.
(1) Test warning devices, horn, light, and other safety equipment and accessories.
(2) Start the engine and be sure all controls and systems operate freely and return to neutral
properly. Check the:
①
Gauges, meters, and indicator lights
②
Service brakes, inching pedal, and parking brakes
③
Hydraulic controls: lift, tilt, and auxiliary (If installed)
④
Accelerator pedal
⑤
Gear selector lever
⑥
Steering system
⑦
Lift mechanism and any attachments.
When the functional check are completed, follow the standard shutdown procedures
Section 5, Starting and operating procedures. Starting and operating procedures.
3) 3) CONCLUDING THE INSPECTION CONCLUDING THE INSPECTION
Do not operate a lift truck that has a maintenance problem or is not safe to operate. Do not operate a lift truck that has a maintenance problem or is not safe to operate.
(1) Instead, remove the key from the starting switch and put an
Out of service tag on the truck. Out of service tag
(2)
If all of the daily inspection checks were normal or satisfactory,
the truck can be operated.
standard shutdown procedures given in
4-2
D35AOM1050