Hyundai 250D-9 Manual page 134

2) 2) ADJUSTING THE LOAD FORKS ADJUSTING THE LOAD FORKS
160D7OM134
3) 3) LOAD ON FORKS LOAD ON FORKS
110D9OM137
110D9OM138
The load forks are adjustable on the hanger, carriage. Forks
should be spaced as far apart as the load will allow. Both forks
should always be the same distance from the center of the fork
carriage. To adjust the forks, raise the carriage slightly. Tilt the mast
fully forward to reduce friction and make the fork slide easier.
Unlock the fork locking pins.
Position the forks by pushing them away from you. Secure the fork
locking pins.
(1) Do not elevate the load with one fork.
Loading with one fork cause the tip over, serious injury or death of
operator.
The work can cause the height difference between both fork tips.
(2) Do not elevate the load with the ends of the forks.
This work can cause the height difference tips due to overload in
the end of the forks.
The load should be loaded at least over 2/3 of fork length.
5-26