Hyundai 250D-9 Manual page 193

(6) Supply oil into the differential gear and the
planetary gear.
·Oil amount : 27.5ℓ(7.3 U.S. gal) (Differential
gear)+2×3.2ℓ(0.8 U.S. gal) (Planetary gear)
(7) Supply oil until it overflows from the oil filler, then
install the plug.
As the machine is hot after operation, wait As the machine is hot after operation, wait
until the temperature has dropped. until the temperature has dropped.
※
If a work requires frequent use of brake, If a work requires frequent use of brake,
replace it earlier than normal change replace it earlier than normal change
interval. interval.
33) 33) CLEANING AXLE BREATHER CLEANING AXLE BREATHER
(1) Remove dust or debris around the breather.
(2) Remove the breather and wash it with cleaning
oil.
34) 34) STRAINER FOR THE TRANSMISSION AND STRAINER FOR THE TRANSMISSION AND
AXLE COOLING LINE AXLE COOLING LINE
(1) Remove suction filter element from the flange
assy using spanner.
(2) Check and clean throughly inside of the suction
filter element by using compressed air.
(3) Reassemble the element on the flange assy.
※
Replace new element if necessary. Replace new element if necessary.
Differential gear
Planetary gear
RH - Side frame
Suction Filter
7-45
Fill & oil
level plug
250D7MI52
Air breather
250D7MI46
Regulator
250D9MI60