Advertisement
Step 39: Front Roof Assembly
Part 1
A: On the Front, from inside the assembly, measure 36" from the end of (062) Roof Support. Place (390)
FR Centre Gable on top of (051) Front Wall Panel so the middle is at the 36" mark. Attach to (062) Roof
Support, (370) Mid Gable Support and (340) Roof Rafters with 5 (S20) #8 x 1-3/8" Wood Screws. (fig. 39.1
and 39.2)
B: From the outside of the assembly place (362) Starburst Centre on top of (370) Mid Gable support then
attach (390) FR Centre Gable to (362) Starburst Centre with 1 (S20) #8 x 1-3/8" Wood Screw. (fig. 39.1 and
39.2)
C: Place 1 (363) Sunburst Side tight to each side of (390) FR Centre Gable and tight to each (340) Roof
Rafter then attach to (362) Starburst Centre and (340) Roof Rafters with 3 (S20) #8 x 1-3/8" Wood Screws
per board. (fig. 39.1 and 39.2)
Fig. 39.1
Outside View
Front
062
Wood Parts
1 x
FR Centre Gable 1 x 6 x 34-15/16"
390
1 x
Starburst Centre 5/4 x 6 x 12"
362
2 x
Sunburst Side 1 x 5 x 10"
363
363
370
340
36"
051
12 x
S20
x 12
363
362
390
Hardware
#8 x 1-3/8" Wood Screw
S20
87
Parts removed
for clarity
Fig. 39.2
Inside View
340
Advertisement
