Advertisement
Step 20: Upper Crowsnest Assembly
Part 1
A: Loosely attach (200) Crowsnest Top to 2 (201) Upright Crowsnest using 2 (WB9) 5/16 x 2-1/8" Wafer Bolts
(with flat washer and t-nut). The distance between uprights must be 25-1/2". (fig. 20.1)
B: Loosely attach (202) Crowsnest Front to each (201) Upright Crowsnest using 2 (WB9) 5/16 x 2-1/8" Wafer
Bolts (with flat washer and t-nut). The distance between (200) Crownest Top and (202) Crowsnest Front must be
27-5/8" (fig. 20.1)
C: Double check the dimensions then tighten the bolts. It is important these dimensions are met so there are no
issues in future steps.
5/16" Flat
Washer
WB9
Wood Parts
1 x
Crowsnest Top 2 x 4 x 29-1/2"
200
2 x
Upright Crowsnest 1 x 2 x 34-1/8"
201
1 x
Crowsnest Front 2 x 4 x 29-1/2"
202
5/16"
T-Nut
201
WB9
Hardware
4 x
5/16 x 2-1/8" Wafer Bolt
WB9
(5/16" flat washer, 5/16" t-nut)
200
WB9
56
Fig. 20.1
202
Advertisement
