Advertisement
Step 30: Attach TNR Brace Assembly
A: Use (281) TNR Upright as a guide to judge the proper bolt location, remove the bottom pan bolt and nut. The
bolt will no longer be needed, but keep the lock nut. (fig. 30.1 and 30.2)
B: Attach the top of the TNR3 Post Mount to TNR2 Slide Clamp Ring using 1 (PB2) 1/4 x 1-1/4" Pan Bolt (with
the previously removed lock nut). (fig. 30.2)
C: Insert TNR3 Post Mount on (281) TNR Upright, pre-drill with a 1/8" drill bit then attach with 2 (S6) #12 x 1"
Pan Screws. (fig. 30.3)
D: Attach (280) TNR Ground Brace flush to the bottom of (041) Narrow Back Panel with 2 (S11) #8 x 2" Wood
Screws and 1 (S4) #8 x 3" Wood Screw. (fig. 30.1 and 30.4)
041
Fig. 30.1
Remove PB1 (1/4 x 3/4"
Pan Bolt) first then install
PB2 (1/4 x 1-1/4" Pan Bolt
with previously removed
lock nut)
281
280
1 x
1/4 x 1-1/4" Pan Bolt
PB2
1 - (1/4" lock nut - previously removed)
S6
2 x
#12 x 1" Pan Screw
1 x
#8 x 3" Wood Screw
S4
2 x
#8 x 2" Wood Screw
S11
Fig. 30.2
PB2
TNR3 Post
Mount
Fig. 30.3
TNR3 Post
Mount
S6
Fig. 30.4
S11
Hardware
75
Lock
Nut
281
041
280
S4
Other Parts
1 x TNR3 Post Mount
Advertisement
