Advertisement
Step 2: Access Ladder / Rockwall Assembly
Part 1
A: Place (020) Left Access on one side of 4 (022) Treads and (021) Right Access on the other side with the
grooves facing in. (fig. 2.1)
B: Fit each (022) Tread into grooves on both (020) and (021) Access rails, make sure the top edge of the (022)
Treads are flush to the front of the Access rails. (fig. 2.1 and 2.2)
C: Pre-drill pilot holes with a 1/8" drill bit and attach rails and treads together using 4 (S3) #8 x 2-1/2" Wood
Screws per tread. (fig. 2.1)
Fig. 2.1
022
021
Fig. 2.2
End View
Flush to
edges
Wood Parts
1 x
Left Access 1-3/8 x 2-1/2 x 57-7/8"
020
1 x
Right Access 1-3/8 x 2-1/2 x 57-7/8"
021
4 x
Tread 5/4 x 4 x 19-1/2"
022
S3
022
Top Edge of Access Rail
Hardware
16 x
#8 x 2-1/2" Wood Screw
S3
20
S3
020
Flush to
top edge
Advertisement
